Manufactured in India, supplied in Nigeria
Acoustic panels in Nigeria
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Nigeria. Made at our own plant in India and shipped into Lagos or Onne.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / The product
What this is, and what it changes in a Nigeria room
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Nigeria is mostly places of assembly, offices, hotels, generator and plant enclosures, schools, hospitals.
Concrete and block construction with hard floors. Estates and apartment blocks sit close together with generators between them.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Nigeria.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification
Published specification, identical wherever we ship it
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
On a Nigeria job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / Local conditions
What the buildings in Nigeria do to the specification
- Humid and hot
PET felt does not hold moisture or feed mould, which matters where mineral products sag within a couple of seasons.
- Generators are a permanent condition
Standby generation runs constantly in many buildings and sits close to occupied space. Enclosure and mass, not absorption, is the answer.
- Very large assembly halls
Congregations in the thousands in hard concrete volumes. Intelligibility fails long before anyone describes the room as echoey.
- Port congestion is real
Lagos can be slow to clear. We quote a realistic window rather than a best case, and we will say if another port suits you better.
- School and campus buildings
Classrooms are hard with large class sizes, and school halls carry assembly and performance in one volume.
- The studio and content scene
A very large music and film industry working out of rooms inside commercial and residential buildings with constant generator noise.
If you are specifying for a Nigeria project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Durability
What the Nigeria climate rules in and rules out
Nigeria is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Supply
Getting it to Nigeria, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Lagos or Onne, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Lagos or Onne |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Lagos or Onne, then road to site. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Before you buy
The things worth knowing before you place the order
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Suppliers who imply a Nigeria presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
07 / In projects
How it looks once it is installed
Nigeria: questions we are actually asked
Do you manufacture acoustic panels in Nigeria?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Nigeria as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Lagos or Onne. You buy at factory prices with one consistent batch across the order.
Why would a Nigeria build-up differ from anywhere else?
Standby generation runs constantly in many buildings and sits close to occupied space. Enclosure and mass, not absorption, is the answer. Congregations in the thousands in hard concrete volumes. Intelligibility fails long before anyone describes the room as echoey. Those two things move the build-up far more than the panel figure does.
How does the Nigeria climate affect this product?
Nigeria is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
What is the delivery time into Nigeria?
ships from: Palwal, Haryana, India, arrives at: Lagos or Onne, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do acoustic panels fail to help?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
What is the minimum order and how is it packed?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Send the drawings, get a straight answer
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.