Home > Netherlands > Acoustic panels
Manufactured in India, supplied in Netherlands
Acoustic panels in Netherlands
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Netherlands. Made at our own plant in India and shipped into Rotterdam, which puts most Dutch sites within a short road run of the port.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The product
What this material is and where it earns its place in Netherlands
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Netherlands is mostly apartments, offices, schools, healthcare, studios, hospitality.
Narrow terraced houses and canal buildings share party walls, with timber floors upstairs and concrete below. Neighbours on both sides is the default condition.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Netherlands.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification sheet
The numbers, and they do not move by city
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
Where a consultant is already engaged on a Netherlands project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / In this market
What we see driving Netherlands briefs
- Timber floors in canal houses
Old narrow houses carry footfall down every floor. A resilient layer under the finish does more than a treatment applied below.
- Lightweight new build
Efficient construction means less mass. Where mass is missing, a dense membrane is usually the cheapest honest fix.
- Recycled content matters here
PET felt is made from recycled bottle flake, which is the first question most Dutch specifiers ask and the easiest one for us to answer.
- Damp, mild climate
Our felt does not absorb moisture, shed fibre or feed mould, which suits cold external walls and sealed rooms.
- School and campus buildings
School buildings are well insulated and airtight with hard cleanable surfaces, so rooms stay live and ventilation noise is always present.
- The studio and content scene
Rooms are fitted into terraces and converted warehouses where the party wall decides what is achievable.
For a Netherlands practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate and durability
What the Netherlands climate rules in and rules out
Netherlands is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Getting it there
Supply into Netherlands, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Rotterdam, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Rotterdam |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we say so before you order.
Sea freight into Rotterdam, then road to site. Being close to the port keeps inland cost low. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Netherlands
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
The material in real interiors
Netherlands: questions we are actually asked
Where are the acoustic panels you supply to Netherlands actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Netherlands as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Rotterdam, which puts most Dutch sites within a short road run of the port. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Netherlands project?
Old narrow houses carry footfall down every floor. A resilient layer under the finish does more than a treatment applied below. Efficient construction means less mass. Where mass is missing, a dense membrane is usually the cheapest honest fix. Those two things move the build-up far more than the panel figure does.
Does Netherlands weather shorten the life of this material?
Netherlands is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
When would material land on a Netherlands site?
ships from: Palwal, Haryana, India, arrives at: Rotterdam, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we say so before you order.
When are acoustic panels the wrong purchase?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
What quantity do we have to order, and in what packaging?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Tell us the room, we will tell you the build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.