Home > Navi Mumbai > Recording studio acoustics and soundproofing
For projects in Navi Mumbai
Recording studio acoustics and soundproofing in Navi Mumbai
Two jobs that must not be confused: keeping the building out, and making the room honest inside. The first is mass and decoupling and has to be built first. The second is absorption and diffusion and can be tuned later. The deepest film, dubbing and music production base in the country, with rooms built inside commercial and residential buildings under real neighbour constraints.
- Isolation
- A measured background level, agreed before anything is bought.
- Low frequency
- Corner and boundary absorption with real depth, not surface foam.
- Early reflections
- Controlled at the mix position, and only there.
- Quote
- From a plan and a section, within 48 hours
01 / What it is
The material, and what it actually does on a Navi Mumbai job
Two jobs that must not be confused: keeping the building out, and making the room honest inside. The first is mass and decoupling and has to be built first. The second is absorption and diffusion and can be tuned later.
The deepest film, dubbing and music production base in the country, with rooms built inside commercial and residential buildings under real neighbour constraints.
Work reaching us from Navi Mumbai is mostly corporate parks, data and equipment halls, residential towers, hotels, schools, clinics.
- Repetition across towers The same separating detail in hundreds of flats. If it underperforms it underperforms everywhere, which makes it worth solving on the drawing.
- Data and equipment halls Continuous mechanical noise next to occupied space and neighbours. Mass and duct treatment, not wall panels.
- Coastal humidity Our PET felt does not absorb moisture or feed mould, which matters where mineral products sag within a couple of monsoons.
- Isolation A measured background level, agreed before anything is bought.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for studio soundproofing are on the main product page. This page covers what that means for a project in Navi Mumbai.
02 / The build-up
How the layers stack, from the structure inwards
-
Layer 1
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Navi Mumbai, split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
Wall, decoupled. Independent stud, membrane between the boards, cavity absorption, two boards. The membrane is one part of a system, never the whole answer.
-
Layer 2
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Navi Mumbai, auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
Resilient bar. Where a full independent leaf will not fit. Effective, and very easy to short circuit with one wrong screw.
-
Layer 3
Soundproof curtains
A layered curtain with a mass loaded vinyl core, used where an opening has to stay an opening. In Navi Mumbai, schools range from compact municipal buildings to large private campuses, all hard surfaced, with assembly halls doing duty as performance spaces.
Track with a seal. Ceiling track plus a floor seal or drape, so the perimeter is closed when it is drawn.
For a Navi Mumbai practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
03 / Local conditions
What decides the build-up in Navi Mumbai
- Repetition across towers
The same separating detail in hundreds of flats. If it underperforms it underperforms everywhere, which makes it worth solving on the drawing.
- Data and equipment halls
Continuous mechanical noise next to occupied space and neighbours. Mass and duct treatment, not wall panels.
- Coastal humidity
Our PET felt does not absorb moisture or feed mould, which matters where mineral products sag within a couple of monsoons.
- Large corporate floors
Open plans with glass and exposed services carry speech a long way. The ceiling plane has to do most of the work.
- The housing stock
Towers and chawls side by side, in RC frame with tile floors. Redevelopment stock shares slabs and lift cores, and monsoon damp rules out anything that holds moisture.
- The studio and content scene
The deepest film, dubbing and music production base in the country, with rooms built inside commercial and residential buildings under real neighbour constraints.
04 / Room by room
Room by room, on a typical Navi Mumbai job
-
Isolation
A measured background level, agreed before anything is bought. The same separating detail in hundreds of flats. If it underperforms it underperforms everywhere, which makes it worth solving on the drawing.
- Acoustic foam and BassBloc, 1800 x 900 mm
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Soundproof curtains, 5.5 kg per sq m
-
Low frequency
Corner and boundary absorption with real depth, not surface foam. Continuous mechanical noise next to occupied space and neighbours. Mass and duct treatment, not wall panels.
- Acoustic foam and BassBloc, 20 mm
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Soundproof curtains, Up to 30 dB
-
Early reflections
Controlled at the mix position, and only there. Our PET felt does not absorb moisture or feed mould, which matters where mineral products sag within a couple of monsoons.
- Acoustic foam and BassBloc, 100 kg per cubic metre
- SoundBlanket mass loaded vinyl, 12.6 kg per sq m, STC on request
- Soundproof curtains, 30
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
04 / Durability
Why the climate in Navi Mumbai changes the material, not the target
Navi Mumbai is warm and humid through most of the year, with a long wet season, and that narrows the material list before acoustics is discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The failure we design against here is mould, sagging fabric finishes and swelling in timber.
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
06 / Worth knowing
Six mistakes that turn into a second fit-out
-
Buying foam to solve an isolation problem
This is the one that comes back as a second fit-out rather than a snag.
-
Treating the room before the shell is isolated
Small on the drawing, expensive on site, and almost always found after handover.
-
Killing the room completely and calling it controlled
A room can be over-treated. Past the target it stops sounding controlled and starts sounding dead, and you paid for that.
-
Treating it as a generic Navi Mumbai job
The same separating detail in hundreds of flats. If it underperforms it underperforms everywhere, which makes it worth solving on the drawing.
05 / Route to site
What the route into Navi Mumbai actually looks like
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | three to four days |
| Dispatch | 2 to 4 working days |
| To site | three to four days |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly fourteen hundred kilometres, normally three to four days on a dedicated truck.
Questions from Navi Mumbai projects
What makes recording studio acoustics and soundproofing different in Navi Mumbai?
The deepest film, dubbing and music production base in the country, with rooms built inside commercial and residential buildings under real neighbour constraints. The same separating detail in hundreds of flats. If it underperforms it underperforms everywhere, which makes it worth solving on the drawing.
Where should the budget go first on a Navi Mumbai project?
Isolation. A measured background level, agreed before anything is bought. Low frequency. Corner and boundary absorption with real depth, not surface foam.
Do you have an office or installation team in Navi Mumbai?
No. We manufacture in India and supply into Navi Mumbai. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Navi Mumbai site?
made at: Our own plant, Palwal, Haryana, reaches site in: three to four days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Buying foam to solve an isolation problem. Treating the room before the shell is isolated.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Tell us the room, we will tell you the build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.