Manufactured in India, supplied in Muscat
Wooden slat acoustic panels in Muscat
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Muscat. Made at our own plant in India and shipped into Sohar or Salalah, both short runs from western India, then road to site.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / Start here
The product, described honestly, for a Muscat brief
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Muscat is mostly hotels and resorts, government and corporate buildings, villas, hospitals, schools, auditoriums.
Villas and low rise blocks in concrete and block with stone or tile floors. Mass is present, impact noise between floors and live rooms are not addressed.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Muscat.
02 / Specification
The numbers, and they do not move by city
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
What we see driving Muscat briefs
- Design led hospitality
Resorts here are judged on how they look as much as how they perform. Colour consistency across a full order is part of the job.
- A short sea leg
Western India to Omani ports is a quick run, which keeps lead times realistic and makes repeat orders practical.
- Stone and masonry interiors
Hard surfaces in generous volumes hold sound for a long time, so ceiling absorption usually does most of the work.
- Heat and coastal humidity
PET felt does not hold moisture, sag or feed mould, which matters where mineral products fail quickly.
- Assembly and performance rooms
Mosques, hotel ballrooms and conference halls are tall hard volumes where a long tail defeats the speech system.
If you are specifying for a Muscat project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate
Why the climate in Muscat changes the material, not the target
Muscat is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the sensible material list before acoustics is even discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The risk we design against here is dust ingress and thermal movement in long runs.
For a Muscat interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Getting it there
What the route into Muscat actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Sohar or Salalah, then road to Muscat |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Sohar or Salalah |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Sohar or Salalah, then road to Muscat. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Before you buy
The things worth knowing before you place the order
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Suppliers who imply a Muscat presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Muscat: questions we are actually asked
Where are the wooden slat acoustic panels you supply to Muscat actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Muscat as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Sohar or Salalah, both short runs from western India, then road to site. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Muscat job?
Western India to Omani ports is a quick run, which keeps lead times realistic and makes repeat orders practical. Resorts here are judged on how they look as much as how they perform. Colour consistency across a full order is part of the job. Those two things move the build-up far more than the panel figure does.
Is this the right material for Muscat conditions?
Muscat is hot and dry for most of the year, with dust and high daytime surface temperatures. Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves. The failure we design against here is dust ingress and thermal movement in long runs.
When would material land on a Muscat site?
ships from: Palwal, Haryana, India, arrives at: Sohar or Salalah, then road to Muscat, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do wooden slat acoustic panels fail to help?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
What quantity do we have to order, and in what packaging?
The same 500 sq ft minimum applies on export. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Tell us the room, we will tell you the build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.