Manufactured in India, supplied in Moradabad
Acoustic carpet and rugs in Moradabad
We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Moradabad. Moradabad works brass for export, and metal working is among the loudest processes we are ever asked about.
- Tile size
- 500 x 500 mm
- Thickness
- 4 mm
- Face
- High density polyester
- Backing
- Felt
- Pack coverage
- 64 sq ft per pack
- Lead time
- 4 to 7 working days
- Minimum order
- From 320 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / The material
What this material is and where it earns its place in Moradabad
A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.
Work reaching us from Moradabad is mostly brass and metal working units, polishing shops, export offices, showrooms, schools, clinics.
Independent houses and builder flats in brick and RC frame, often built floor by floor for different households, so the slab between them was never detailed as a separation.
- Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
- Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
- Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
- What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Moradabad.
02 / Specification
The numbers, and they do not move by city
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- Standard tile4 mm. Offices, classrooms, studios, corridors
| Tile size | 500 x 500 mm |
|---|---|
| Thickness | 4 mm |
| Face | High density polyester |
| Backing | Felt |
| Pack coverage | 64 sq ft per pack |
| Boxed | 20 kg, 55 x 55 x 15 cm |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / In this market
What the buildings in Moradabad do to the specification
- Small units in residential streets
Workshops sit between homes, so noise leaving the unit is as much the problem as noise inside it.
- Metal working is genuinely loud
Hammering, spinning and buffing produce levels that matter for hearing. Enclosure at the source is the only treatment that changes anything.
- Export offices and showrooms
Buyer meeting rooms inside working units, where a conversation has to be possible over the shop floor.
- Next day from the plant
A few hours by road, so samples arrive quickly and freight stays low.
- Assembly and performance rooms
Banquet halls, marriage lawns and auditoria are large hard volumes where amplified speech and music run late into the night.
- The housing stock
Independent houses and builder flats in brick and RC frame, often built floor by floor for different households, so the slab between them was never detailed as a separation.
Architects working in Moradabad usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate and durability
The Moradabad climate decides the material list
Moradabad is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Supply
What the route into Moradabad actually looks like
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | next day |
| Dispatch | 2 to 4 working days |
| To site | next day |
| Packing | Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly two hundred and thirty kilometres, normally next day on a dedicated truck.
320 sq ft for carpet tiles, 500 sq ft for rugs.
| Carpet tiles | 320 sq ft, about 30 sq m, 5 packs |
|---|---|
| Rugs | 500 sq ft, about 46 sq m |
A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.
06 / Worth knowing
Four honest warnings before you buy
-
The wrong product for the problem
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Moradabad
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Moradabad: questions we are actually asked
Do you manufacture acoustic carpet and rugs in Moradabad?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Moradabad as the manufacturer rather than through a dealer. Moradabad works brass for export, and metal working is among the loudest processes we are ever asked about. You buy at factory prices with one consistent batch across the order.
Why would a Moradabad build-up differ from anywhere else?
Hammering, spinning and buffing produce levels that matter for hearing. Enclosure at the source is the only treatment that changes anything. Workshops sit between homes, so noise leaving the unit is as much the problem as noise inside it. Those two things move the build-up far more than the panel figure does.
Does Moradabad weather shorten the life of this material?
Moradabad is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
How does an order actually travel to Moradabad?
made at: Our own plant, Palwal, Haryana, reaches site in: next day, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do acoustic carpet and rugs fail to help?
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
How is the order packed and what is the minimum?
320 sq ft for carpet tiles, 500 sq ft for rugs. Carpet tiles, 320 sq ft, about 30 sq m, 5 packs. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Next step
Send the drawings, get a straight answer
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.