Manufactured in India, supplied in Mizoram
Wooden slat acoustic panels in Mizoram
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Mizoram. Mizoram is hills, heavy rain and an extraordinary choral tradition, which makes performance and assembly spaces an unusually large share of the work.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The material
What this material is and where it earns its place in Mizoram
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Mizoram is mostly community and church halls, schools and colleges, hospitals, offices, hotels, assembly spaces.
Timber and RC construction on steep slopes, with hard floors and very high rainfall.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Mizoram.
02 / Specification sheet
One specification sheet, the same in every market
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / In this market
What decides the build-up in Mizoram
- Halls built for singing
Choral and congregational use means the room has to support music and still let speech be understood. Those pull in opposite directions unless it is designed.
- Rain on metal roofs
Heavy rainfall on light roofing is a genuine noise source that interrupts services and lessons alike.
- Light hill construction
Timber and light structures with very little mass, so noise passes easily and mass has to be added.
- Steep final roads
The last leg is hard on a pallet. We brace and wrap for it and confirm dates before dispatch.
- Assembly and performance rooms
Church buildings are the primary assembly spaces and carry unamplified choral music, so decay time matters more than absorption area.
Architects working in Mizoram usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate and durability
Durability in Mizoram, before acoustics is discussed
Mizoram is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
For a Mizoram interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Supply
How material reaches a Mizoram site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | five to six days |
| Dispatch | 2 to 4 working days |
| To site | five to six days |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly twenty three hundred kilometres, normally five to six days. The final hill roads are steep and we pack for them.
500 sq ft, about 46 sq m, whatever the substrate, pattern, width or thickness.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Before you buy
The things worth knowing before you place the order
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Mizoram certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Mizoram: questions we are actually asked
Do you manufacture wooden slat acoustic panels in Mizoram?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Mizoram as the manufacturer rather than through a dealer. Mizoram is hills, heavy rain and an extraordinary choral tradition, which makes performance and assembly spaces an unusually large share of the work. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Mizoram enquiry?
Choral and congregational use means the room has to support music and still let speech be understood. Those pull in opposite directions unless it is designed. Heavy rainfall on light roofing is a genuine noise source that interrupts services and lessons alike. Those two things move the build-up far more than the panel figure does.
Does Mizoram weather shorten the life of this material?
Mizoram is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
What is the delivery time into Mizoram?
made at: Our own plant, Palwal, Haryana, reaches site in: five to six days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy wooden slat acoustic panels for?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
What quantity do we have to order, and in what packaging?
500 sq ft, about 46 sq m, whatever the substrate, pattern, width or thickness. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.