Manufactured in India, supplied in Mecca
Wood wool acoustic panels in Mecca
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Mecca. Made at our own plant in India and shipped into Jeddah, which is a short road run from the city, so large hotel quantities land without a long inland leg.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / What it is
The material, and what it actually does on a Mecca job
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Mecca is mostly hotel guest rooms and corridors, lobbies, assembly and function halls, offices, clinics.
Villas and apartment blocks are concrete and block with hard stone or tile throughout. Mass is there, but every room is live and impact noise between floors is untreated.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Mecca.
02 / Data sheet
The numbers, and they do not move by city
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / In this market
The Mecca conditions that change the answer
- Rooms occupied around the clock
In peak season somebody is always asleep and somebody is always in the corridor. Guest room isolation carries the whole guest experience, and door and corridor details cause more complaints than walls do.
- Refurbishment windows do not move
Work happens between seasons, on dates fixed long in advance. We give real dispatch and transit dates so the programme is not waiting on a container that will not land in time.
- Repeat detail at scale
A thousand rooms means the same build-up a thousand times. Consistent thickness and density across the whole order matters more than the headline figure on any one sheet.
- Halls built for crowds
Large assembly and function spaces in hard concrete carry long reverberation. Speech stops being intelligible long before the room sounds obviously wrong.
- Assembly and performance rooms
Mosques, conference halls and hotel ballrooms are tall hard volumes where intelligibility over a long reverberation tail is the whole brief.
- School and campus buildings
New school and university buildings are large, hard and highly glazed. Lecture theatres and sports halls are the spaces that fail first, and ceiling absorption is the practical fix.
For a Mecca practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate
Why the climate in Mecca changes the material, not the target
Mecca is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the sensible material list before acoustics is even discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The risk we design against here is dust ingress and thermal movement in long runs.
For a Mecca interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Logistics
Supply into Mecca, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Jeddah, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Jeddah |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Jeddah, then a short road run to site. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Read this first
Where this goes wrong, said plainly
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Local approvals that nobody actually holds
We hold no Mecca certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Mecca: questions we are actually asked
Do you manufacture wood wool acoustic panels in Mecca?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Mecca as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Jeddah, which is a short road run from the city, so large hotel quantities land without a long inland leg. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Mecca job?
In peak season somebody is always asleep and somebody is always in the corridor. Guest room isolation carries the whole guest experience, and door and corridor details cause more complaints than walls do. Work happens between seasons, on dates fixed long in advance. We give real dispatch and transit dates so the programme is not waiting on a container that will not land in time. Those two things move the build-up far more than the panel figure does.
Does Mecca weather shorten the life of this material?
Mecca is hot and dry for most of the year, with dust and high daytime surface temperatures. Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves. The failure we design against here is dust ingress and thermal movement in long runs.
How does an order actually travel to Mecca?
ships from: Palwal, Haryana, India, arrives at: Jeddah, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy wood wool acoustic panels for?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
What quantity do we have to order, and in what packaging?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Tell us the room, we will tell you the build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.