Manufactured in India, supplied in Mangaluru
Acoustic carpet and rugs in Mangaluru
We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Mangaluru. Mangaluru is a port city with a large medical and education sector, and a coastal climate that decides the material before anything else.
- Tile size
- 500 x 500 mm
- Thickness
- 4 mm
- Face
- High density polyester
- Backing
- Felt
- Pack coverage
- 64 sq ft per pack
- Lead time
- 4 to 7 working days
- Minimum order
- From 320 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / The material
What this is, and what it changes in a Mangaluru room
A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.
Work reaching us from Mangaluru is mostly medical colleges and hospitals, education campuses, port and industrial, hotels, offices, schools.
RC frame apartments and independent houses with tile and stone floors, in dense neighbourhoods where buildings sit a few feet apart.
- Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
- Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
- Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
- What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Mangaluru.
02 / Specification
One specification sheet, the same in every market
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Standard tile4 mm. Offices, classrooms, studios, corridors
| Tile size | 500 x 500 mm |
|---|---|
| Thickness | 4 mm |
| Face | High density polyester |
| Backing | Felt |
| Pack coverage | 64 sq ft per pack |
| Boxed | 20 kg, 55 x 55 x 15 cm |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
What the buildings in Mangaluru do to the specification
- Humidity decides the material
PET felt does not absorb moisture, shed fibre or feed mould. On this coast that is the whole material selection argument.
- Teaching hospitals
Lecture theatres, consult rooms and wards in one building, each needing a different answer.
- Port and industrial work
Handling and workshop noise where enclosure and mass do the work rather than absorption.
- Five days by road
A long run, confirmed before dispatch, with samples sent ahead of the order.
- Assembly and performance rooms
Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
- The housing stock
RC frame apartments and independent houses with tile and stone floors, in dense neighbourhoods where buildings sit a few feet apart.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Conditions
The Mangaluru climate decides the material list
Mangaluru is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Supply
How material reaches a Mangaluru site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | five days |
| Dispatch | 2 to 4 working days |
| To site | five days |
| Packing | Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly twenty two hundred kilometres, normally five days on a dedicated truck.
320 sq ft for carpet tiles, 500 sq ft for rugs.
| Carpet tiles | 320 sq ft, about 30 sq m, 5 packs |
|---|---|
| Rugs | 500 sq ft, about 46 sq m |
A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.
06 / Before you buy
The things worth knowing before you place the order
-
The wrong product for the problem
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Mangaluru
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Mangaluru: questions we are actually asked
Where are the acoustic carpet and rugs you supply to Mangaluru actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Mangaluru as the manufacturer rather than through a dealer. Mangaluru is a port city with a large medical and education sector, and a coastal climate that decides the material before anything else. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Mangaluru enquiry?
PET felt does not absorb moisture, shed fibre or feed mould. On this coast that is the whole material selection argument. Lecture theatres, consult rooms and wards in one building, each needing a different answer. Those two things move the build-up far more than the panel figure does.
Is this the right material for Mangaluru conditions?
Mangaluru is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
What is the delivery time into Mangaluru?
made at: Our own plant, Palwal, Haryana, reaches site in: five days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy acoustic carpet and rugs for?
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
What quantity do we have to order, and in what packaging?
320 sq ft for carpet tiles, 500 sq ft for rugs. Carpet tiles, 320 sq ft, about 30 sq m, 5 packs. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Next step
Drawings in, BOQ and a delivered date out
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.