Manufactured in India, supplied in Madrid
Acoustic foam and BassBloc in Madrid
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Madrid. Made at our own plant in India, shipped into Valencia or Barcelona and trucked inland to Madrid, with the road leg built into the dates we quote rather than left out of them.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / What it is
The product, described honestly, for a Madrid brief
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Madrid is mostly ensanche apartments, Castellana office floors, restaurants, hotels, clinics, studios, schools.
The Ensanche and equivalent city blocks stack flats around a patio with shared walls and slabs. Footfall and speech move between homes, which is a mass and isolation problem.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Madrid.
02 / Specification
The published figures, unchanged by location
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
The Madrid conditions that change the answer
- Ensanche blocks share everything
The classic Madrid block stacks flats around a central patio with shared walls and slabs. Footfall and speech move between homes, which is a mass and isolation problem, not a panel problem.
- Castellana floors have nothing soft
Tower and corporate floors run glass to glass with raised floors and exposed slabs. Speech carries because there is nowhere for it to land, so the ceiling has to do the work.
- A city that eats and drinks late
Bars and restaurants run long hours directly under apartments. The complaint is almost always low frequency and footfall, and it arrives fast.
- Closed up against the heat
Once a room is sealed and air conditioned it stops leaking sound outward and starts building it up inside. Absorption has to be balanced, not maximised.
- The housing stock
The Ensanche and equivalent city blocks stack flats around a patio with shared walls and slabs. Footfall and speech move between homes, which is a mass and isolation problem.
- The studio and content scene
Studios sit inside residential blocks, so the neighbour above matters more than the room treatment.
Architects working in Madrid usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Conditions
The Madrid climate decides the material list
Madrid is hot dry summers and mild wet winters, and that narrows the sensible material list before acoustics is even discussed.
The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing.
The risk we design against here is seasonal movement in timber and winter damp in unheated stock.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Route to site
How material reaches a Madrid site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Valencia or Barcelona, then road inland to Madrid |
| Dispatch | 4 to 7 working days |
| Freight | Sea, then road inland |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Valencia or Barcelona, then road inland to Madrid. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Straight talk
The things worth knowing before you place the order
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Madrid
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
The material in real interiors
Madrid: questions we are actually asked
Are these acoustic foam and BassBloc made in Madrid?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Madrid as the manufacturer rather than through a dealer. Made at our own plant in India, shipped into Valencia or Barcelona and trucked inland to Madrid, with the road leg built into the dates we quote rather than left out of them. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Madrid job?
The classic Madrid block stacks flats around a central patio with shared walls and slabs. Footfall and speech move between homes, which is a mass and isolation problem, not a panel problem. Tower and corporate floors run glass to glass with raised floors and exposed slabs. Speech carries because there is nowhere for it to land, so the ceiling has to do the work. Those two things move the build-up far more than the panel figure does.
Does Madrid weather shorten the life of this material?
Madrid is hot dry summers and mild wet winters. The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing. The failure we design against here is seasonal movement in timber and winter damp in unheated stock.
What is the delivery time into Madrid?
ships from: Palwal, Haryana, India, arrives at: Valencia or Barcelona, then road inland to Madrid, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will acoustic foam and BassBloc not do?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
How is the order packed and what is the minimum?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Send a plan and a section, get a real build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.