For projects in Ludhiana
Recording studio acoustics and soundproofing in Ludhiana
Two jobs that must not be confused: keeping the building out, and making the room honest inside. The first is mass and decoupling and has to be built first. The second is absorption and diffusion and can be tuned later. Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
- Isolation
- A measured background level, agreed before anything is bought.
- Low frequency
- Corner and boundary absorption with real depth, not surface foam.
- Early reflections
- Controlled at the mix position, and only there.
- Quote
- From a plan and a section, within 48 hours
01 / The material
What this is, and what it changes in a Ludhiana room
Two jobs that must not be confused: keeping the building out, and making the room honest inside. The first is mass and decoupling and has to be built first. The second is absorption and diffusion and can be tuned later.
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
Work reaching us from Ludhiana is mostly knitting and textile units, workshops, worker areas, offices, showrooms, schools, clinics.
- Machine noise, all shift Knitting and processing machines run continuously. The honest fix is enclosing or barriering the machine, not lining the walls of the hall.
- Industry beside housing Units sit close to homes, so noise leaving the building matters as much as noise inside it. Those are two different treatments.
- Hard halls, no intelligibility Large sheds with steel and concrete surfaces make instructions and alarms hard to understand. Targeted absorption fixes that without touching the machines.
- Isolation A measured background level, agreed before anything is bought.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for studio soundproofing are on the main product page. This page covers what that means for a project in Ludhiana.
02 / The build-up
The stack, in the order it is installed
-
Layer 1
Acoustic foam and BassBloc
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing. In Ludhiana, agro processing and light engineering plant, with generator sets and machinery close to occupied buildings.
First reflection points. Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
-
Layer 2
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Ludhiana, auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
Ceiling first. In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
-
Layer 3
Soundproof curtains
A layered curtain with a mass loaded vinyl core, used where an opening has to stay an opening. In Ludhiana, large school and college campuses in concrete and tile, with halls carrying assembly and performance.
Double layer at a doorway. Two curtains with an air gap where a single layer will not reach the target.
Architects working in Ludhiana usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
03 / In this market
What the buildings in Ludhiana do to the specification
- Machine noise, all shift
Knitting and processing machines run continuously. The honest fix is enclosing or barriering the machine, not lining the walls of the hall.
- Industry beside housing
Units sit close to homes, so noise leaving the building matters as much as noise inside it. Those are two different treatments.
- Hard halls, no intelligibility
Large sheds with steel and concrete surfaces make instructions and alarms hard to understand. Targeted absorption fixes that without touching the machines.
- One to two days by road
A dedicated truck from Palwal, with samples sent ahead so you can check the material before committing.
- The housing stock
Independent houses and RC frame apartments with stone and tile floors, in towns with agricultural and light industrial activity nearby.
- The studio and content scene
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
04 / Room by room
Where the money goes on a Ludhiana project
-
Isolation
A measured background level, agreed before anything is bought. Knitting and processing machines run continuously. The honest fix is enclosing or barriering the machine, not lining the walls of the hall.
- Acoustic foam and BassBloc, 1800 x 900 mm
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Soundproofing materials, Mass, then decoupling, then cavity absorption, then sealing
-
Low frequency
Corner and boundary absorption with real depth, not surface foam. Units sit close to homes, so noise leaving the building matters as much as noise inside it. Those are two different treatments.
- Acoustic foam and BassBloc, 20 mm
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Soundproofing materials, ASTM E90 for the barrier, ASTM C423 for the absorber
-
Early reflections
Controlled at the mix position, and only there. Large sheds with steel and concrete surfaces make instructions and alarms hard to understand. Targeted absorption fixes that without touching the machines.
- Acoustic foam and BassBloc, 100 kg per cubic metre
- SoundBlanket mass loaded vinyl, 12.6 kg per sq m, STC on request
- Soundproofing materials, 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
04 / Durability
The Ludhiana climate decides the material list
Ludhiana is hot summers, mild winters and a distinct wet season, and that narrows the material list before acoustics is discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The failure we design against here is wet-season humidity behind linings.
Where a consultant is already engaged on a Ludhiana project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
06 / Straight talk
The six errors that cost the most
-
Buying foam to solve an isolation problem
Small on the drawing, expensive on site, and almost always found after handover.
-
Treating the room before the shell is isolated
Small on the drawing, expensive on site, and almost always found after handover.
-
Killing the room completely and calling it controlled
A room can be over-treated. Past the target it stops sounding controlled and starts sounding dead, and you paid for that.
-
Treating it as a generic Ludhiana job
Knitting and processing machines run continuously. The honest fix is enclosing or barriering the machine, not lining the walls of the hall.
05 / Logistics
What the route into Ludhiana actually looks like
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | one to two days |
| Dispatch | 2 to 4 working days |
| To site | one to two days |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly three hundred and fifty kilometres. Full loads on a dedicated truck, smaller consignments on a shared vehicle.
Questions from Ludhiana projects
What makes recording studio acoustics and soundproofing different in Ludhiana?
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room. Knitting and processing machines run continuously. The honest fix is enclosing or barriering the machine, not lining the walls of the hall.
Where should the budget go first on a Ludhiana project?
Isolation. A measured background level, agreed before anything is bought. Low frequency. Corner and boundary absorption with real depth, not surface foam.
Do you have an office or installation team in Ludhiana?
No. We manufacture in India and supply into Ludhiana. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Ludhiana site?
made at: Our own plant, Palwal, Haryana, reaches site in: one to two days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Buying foam to solve an isolation problem. Treating the room before the shell is isolated.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Drawings in, BOQ and a delivered date out
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.