Home > Lakshadweep > Wooden slat acoustic panels
Manufactured in India, supplied in Lakshadweep
Wooden slat acoustic panels in Lakshadweep
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Lakshadweep. Lakshadweep finishes its journey by ship.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / Start here
The material, and what it actually does on a Lakshadweep job
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Lakshadweep is mostly resort villas and guest rooms, administrative buildings, schools, clinics, dining spaces.
Compact RC frame and block construction with hard floors, on small islands in a salt laden humid climate.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Lakshadweep.
02 / The numbers
One specification sheet, the same in every market
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / In this market
The Lakshadweep conditions that change the answer
- The last leg is by sea
Vessel transfer means handling, spray and limited lifting. We wrap, brace and size pallets for that rather than for a loading dock.
- Get it right the first time
A wrong or damaged item cannot be replaced quickly. We confirm the specification and send samples before anything ships.
- Salt air is relentless
PET felt does not absorb moisture, rot or corrode. On a coral atoll that is not a preference, it is the only sensible choice.
- Lightly built structures
Island construction has little mass, so isolation between rooms is limited by the building and we say so rather than overselling.
- Assembly and performance rooms
Mosques, community halls and resort function rooms are hard volumes carrying amplified speech.
Architects working in Lakshadweep usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Durability
The Lakshadweep climate decides the material list
Lakshadweep is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Supply
Getting it to Lakshadweep, with real dates
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | a boat leg after Kochi |
| Dispatch | 2 to 4 working days |
| To site | a boat leg after Kochi |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal to Kochi, then by ship to the islands. The final leg is a vessel transfer and we pack for it.
500 sq ft, about 46 sq m, whatever the substrate, pattern, width or thickness.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Before you buy
Four honest warnings before you buy
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Lakshadweep
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Lakshadweep: questions we are actually asked
Are these wooden slat acoustic panels made in Lakshadweep?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Lakshadweep as the manufacturer rather than through a dealer. Lakshadweep finishes its journey by ship. You buy at factory prices with one consistent batch across the order.
Why would a Lakshadweep build-up differ from anywhere else?
Vessel transfer means handling, spray and limited lifting. We wrap, brace and size pallets for that rather than for a loading dock. A wrong or damaged item cannot be replaced quickly. We confirm the specification and send samples before anything ships. Those two things move the build-up far more than the panel figure does.
Is this the right material for Lakshadweep conditions?
Lakshadweep is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How quickly can material reach a site in Lakshadweep?
made at: Our own plant, Palwal, Haryana, reaches site in: a boat leg after Kochi, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will wooden slat acoustic panels not do?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
What is the minimum order and how is it packed?
500 sq ft, about 46 sq m, whatever the substrate, pattern, width or thickness. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Send the drawings, get a straight answer
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.