Manufactured in India, supplied in Kuwait
Wood wool acoustic panels in Kuwait
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Kuwait. Made at our own plant in India and shipped into Shuwaikh or Shuaiba, short runs from western India, then road to site.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / What it is
The material, and what it actually does on a Kuwait job
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Kuwait is mostly plant and equipment rooms, offices, towers and villas, hotels, hospitals, schools.
Concrete and block villas and apartment blocks with stone and tile throughout, so every room is live and slabs pass impact noise.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Kuwait.
02 / Specification
The numbers, and they do not move by city
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
On a Kuwait job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What we see driving Kuwait briefs
- Cooling plant is the defining condition
Large units running continuously next to occupied space. That is mass, isolation and duct treatment, not panels on a wall.
- Extreme heat
PET felt does not sag, shed fibre or break down at high temperature, which matters in roof voids and plant spaces that get genuinely hot.
- Sealed buildings all year
Nothing opens. Sound stops escaping and accumulates, so absorption inside has to be balanced rather than piled on.
- Short sea leg from India
A quick run from western India keeps lead times realistic and makes repeat consignments practical.
- Assembly and performance rooms
Mosques and function halls are tall hard volumes where intelligibility over a long tail is the brief.
- School and campus buildings
School buildings are hard surfaced with high ceilings and large halls that double as assembly and sport.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate and durability
The Kuwait climate decides the material list
Kuwait is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the sensible material list before acoustics is even discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The risk we design against here is dust ingress and thermal movement in long runs.
For a Kuwait interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Route to site
Supply into Kuwait, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Shuwaikh or Shuaiba, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Shuwaikh |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Shuwaikh or Shuaiba, then road to site. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Suppliers who imply a Kuwait presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Kuwait: questions we are actually asked
Are these wood wool acoustic panels made in Kuwait?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Kuwait as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Shuwaikh or Shuaiba, short runs from western India, then road to site. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Kuwait project?
Large units running continuously next to occupied space. That is mass, isolation and duct treatment, not panels on a wall. PET felt does not sag, shed fibre or break down at high temperature, which matters in roof voids and plant spaces that get genuinely hot. Those two things move the build-up far more than the panel figure does.
How does the Kuwait climate affect this product?
Kuwait is hot and dry for most of the year, with dust and high daytime surface temperatures. Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves. The failure we design against here is dust ingress and thermal movement in long runs.
What is the delivery time into Kuwait?
ships from: Palwal, Haryana, India, arrives at: Shuwaikh or Shuaiba, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy wood wool acoustic panels for?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
How is the order packed and what is the minimum?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.