Manufactured in India, supplied in Kuwait
Acoustic foam and BassBloc in Kuwait
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Kuwait. Made at our own plant in India and shipped into Shuwaikh or Shuaiba, short runs from western India, then road to site.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / The product
What this is, and what it changes in a Kuwait room
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Kuwait is mostly plant and equipment rooms, offices, towers and villas, hotels, hospitals, schools.
Concrete and block villas and apartment blocks with stone and tile throughout, so every room is live and slabs pass impact noise.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Kuwait.
02 / Specification
The published figures, unchanged by location
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
Where a consultant is already engaged on a Kuwait project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / In this market
What the buildings in Kuwait do to the specification
- Cooling plant is the defining condition
Large units running continuously next to occupied space. That is mass, isolation and duct treatment, not panels on a wall.
- Extreme heat
PET felt does not sag, shed fibre or break down at high temperature, which matters in roof voids and plant spaces that get genuinely hot.
- Sealed buildings all year
Nothing opens. Sound stops escaping and accumulates, so absorption inside has to be balanced rather than piled on.
- Short sea leg from India
A quick run from western India keeps lead times realistic and makes repeat consignments practical.
- The housing stock
Concrete and block villas and apartment blocks with stone and tile throughout, so every room is live and slabs pass impact noise.
- The studio and content scene
Production rooms are fitted inside existing commercial floors with neighbouring tenancies setting the limit.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate and durability
The Kuwait climate decides the material list
Kuwait is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the sensible material list before acoustics is even discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The risk we design against here is dust ingress and thermal movement in long runs.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Logistics
Supply into Kuwait, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Shuwaikh or Shuaiba, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Shuwaikh |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Shuwaikh or Shuaiba, then road to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Worth knowing
Four honest warnings before you buy
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Local approvals that nobody actually holds
We hold no Kuwait certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
The product on finished jobs
Kuwait: questions we are actually asked
Where are the acoustic foam and BassBloc you supply to Kuwait actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Kuwait as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Shuwaikh or Shuaiba, short runs from western India, then road to site. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Kuwait enquiry?
Large units running continuously next to occupied space. That is mass, isolation and duct treatment, not panels on a wall. PET felt does not sag, shed fibre or break down at high temperature, which matters in roof voids and plant spaces that get genuinely hot. Those two things move the build-up far more than the panel figure does.
Will this material last in the Kuwait climate?
Kuwait is hot and dry for most of the year, with dust and high daytime surface temperatures. Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves. The failure we design against here is dust ingress and thermal movement in long runs.
When would material land on a Kuwait site?
ships from: Palwal, Haryana, India, arrives at: Shuwaikh or Shuaiba, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will acoustic foam and BassBloc not do?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
How is the order packed and what is the minimum?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Send a plan and a section, get a real build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.