Manufactured in India, supplied in Kozhikode
Wood wool acoustic panels in Kozhikode
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Kozhikode. Kozhikode is coastal, humid and building steadily, and humidity is the first thing that decides which acoustic material is worth installing here.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / Start here
The product, described honestly, for a Kozhikode brief
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Kozhikode is mostly houses and apartments, hospitals, schools and colleges, auditoriums, hotels, offices.
Independent houses with high ceilings, tile floors and open plan layouts built for heat and very heavy monsoon, which rules out anything that absorbs moisture.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Kozhikode.
02 / Specification
The published figures, unchanged by location
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / In this market
What the buildings in Kozhikode do to the specification
- Humidity beats everything else
PET felt does not absorb moisture, shed fibre or feed mould. In a monsoon climate that decides whether a ceiling is still good in five years.
- Large private houses
A lot of residential work here is generous in size and finished carefully, with dedicated rooms for music or cinema.
- Hospitals and colleges
Institutional buildings in concrete and tile, with consult rooms that need privacy and lecture rooms that need intelligibility.
- Five to six days by road
A long run, so we confirm the schedule before dispatch and send samples ahead of the order.
- Assembly and performance rooms
Auditoria, church buildings and community halls are large hard volumes carrying amplified speech and music.
- School and campus buildings
Schools and colleges are naturally ventilated with open corridors, so absorption alone will not fix intelligibility.
Architects working in Kozhikode usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate
What the Kozhikode climate rules in and rules out
Kozhikode is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Getting it there
How material reaches a Kozhikode site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | five to six days |
| Dispatch | 2 to 4 working days |
| To site | five to six days |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly two thousand five hundred kilometres, normally five to six days on a dedicated truck.
500 sq ft, about 46 sq m.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Before you buy
Where this goes wrong, said plainly
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Suppliers who imply a Kozhikode presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Kozhikode: questions we are actually asked
Do you manufacture wood wool acoustic panels in Kozhikode?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Kozhikode as the manufacturer rather than through a dealer. Kozhikode is coastal, humid and building steadily, and humidity is the first thing that decides which acoustic material is worth installing here. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Kozhikode project?
PET felt does not absorb moisture, shed fibre or feed mould. In a monsoon climate that decides whether a ceiling is still good in five years. A lot of residential work here is generous in size and finished carefully, with dedicated rooms for music or cinema. Those two things move the build-up far more than the panel figure does.
Does Kozhikode weather shorten the life of this material?
Kozhikode is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
When would material land on a Kozhikode site?
made at: Our own plant, Palwal, Haryana, reaches site in: five to six days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do wood wool acoustic panels fail to help?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
How is the order packed and what is the minimum?
500 sq ft, about 46 sq m. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Send a plan and a section, get a real build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.