Manufactured in India, supplied in Kenya
Wooden slat acoustic panels in Kenya
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Kenya. Made at our own plant in India and shipped into Mombasa, a short and frequently served run from western India, then road inland to Nairobi.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The product, described honestly, for a Kenya brief
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Kenya is mostly offices and corporate buildings, hotels and lodges, places of assembly, schools, hospitals.
Concrete and block apartment blocks and houses with hard floors, in developments where units share walls and slabs.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Kenya.
02 / Specification
Published specification, identical wherever we ship it
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / In this market
What we see driving Kenya briefs
- A short sea leg from India
Western India to Mombasa is one of the quicker runs we operate, which makes modest and repeat consignments practical.
- A gateway, not just a destination
Material often continues inland to neighbouring countries. Tell us and we brace and pack for the second journey.
- Generators are routine
Standby generation runs often enough to be a permanent condition and sits close to occupied space. Enclosure at the source is the fix.
- Large assembly spaces
Halls and places of assembly used by big congregations, where intelligibility fails well before the room is called echoey.
- Assembly and performance rooms
Church buildings, conference rooms and event halls are hard volumes carrying amplified speech and music.
If you are specifying for a Kenya project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate and durability
Why the climate in Kenya changes the material, not the target
Kenya is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Logistics
Supply into Kenya, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Mombasa, then road inland or onward across borders |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Mombasa |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Mombasa, then road inland to Nairobi or onward across borders. Air freight for samples.
The same 500 sq ft minimum applies on export.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Straight talk
The things worth knowing before you place the order
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
A claim of being local to Kenya
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Kenya: questions we are actually asked
Do you manufacture wooden slat acoustic panels in Kenya?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Kenya as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Mombasa, a short and frequently served run from western India, then road inland to Nairobi. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Kenya enquiry?
Western India to Mombasa is one of the quicker runs we operate, which makes modest and repeat consignments practical. Material often continues inland to neighbouring countries. Tell us and we brace and pack for the second journey. Those two things move the build-up far more than the panel figure does.
Will this material last in the Kenya climate?
Kenya is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How does an order actually travel to Kenya?
ships from: Palwal, Haryana, India, arrives at: Mombasa, then road inland or onward across borders, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will wooden slat acoustic panels not do?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
What is the minimum order and how is it packed?
The same 500 sq ft minimum applies on export. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Send a plan and a section, get a real build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.