Manufactured in India, supplied in Jamnagar
Acoustic foam and BassBloc in Jamnagar
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Jamnagar. Jamnagar is brass parts and refining, so the work splits between small loud workshops and very large process plant.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / Start here
What this is, and what it changes in a Jamnagar room
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Jamnagar is mostly brass and machining workshops, refinery and process plant, control rooms, offices, hospitals, schools.
RC frame apartments and bungalows with stone and tile floors, in dry dusty conditions where open products collect dust.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Jamnagar.
02 / Specification
One specification sheet, the same in every market
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / Local conditions
The Jamnagar conditions that change the answer
- Two very different scales
A brass workshop and a refinery need opposite approaches. We ask which one you are before quoting anything.
- Boundary noise
On large plant the measurement that matters is at the site edge, which is a containment problem rather than a room one.
- Control rooms
Operators listening for alarms through long shifts need a low background before anything else matters.
- Coastal salt air
PET felt does not absorb moisture, rot or corrode, which matters where mineral products fail quickly.
- The housing stock
RC frame apartments and bungalows with stone and tile floors, in dry dusty conditions where open products collect dust.
- The studio and content scene
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
Architects working in Jamnagar usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Conditions
Durability in Jamnagar, before acoustics is discussed
Jamnagar is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the sensible material list before acoustics is even discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The risk we design against here is dust ingress and thermal movement in long runs.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Route to site
How material reaches a Jamnagar site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | three days |
| Dispatch | 2 to 4 working days |
| To site | three days |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly eleven hundred kilometres, normally three days on a dedicated truck.
200 sq ft for acoustic foam, 300 sq ft for BassBloc, 10 pieces for bass traps.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Straight talk
Four honest warnings before you buy
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Jamnagar certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
In finished rooms
Jamnagar: questions we are actually asked
Where are the acoustic foam and BassBloc you supply to Jamnagar actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Jamnagar as the manufacturer rather than through a dealer. Jamnagar is brass parts and refining, so the work splits between small loud workshops and very large process plant. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Jamnagar enquiry?
A brass workshop and a refinery need opposite approaches. We ask which one you are before quoting anything. On large plant the measurement that matters is at the site edge, which is a containment problem rather than a room one. Those two things move the build-up far more than the panel figure does.
Is this the right material for Jamnagar conditions?
Jamnagar is hot and dry for most of the year, with dust and high daytime surface temperatures. Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves. The failure we design against here is dust ingress and thermal movement in long runs.
How does an order actually travel to Jamnagar?
made at: Our own plant, Palwal, Haryana, reaches site in: three days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy acoustic foam and BassBloc for?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
How is the order packed and what is the minimum?
200 sq ft for acoustic foam, 300 sq ft for BassBloc, 10 pieces for bass traps. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Send a plan and a section, get a real build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.