Manufactured in India, supplied in Jalandhar
Wood wool acoustic panels in Jalandhar
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Jalandhar. Jalandhar is a manufacturing town with an unusually large stock of big private houses, so we end up supplying light industry and high end residential in the same week.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / The material
What you are buying, and what it fixes in Jalandhar
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Jalandhar is mostly light industry and workshops, large private houses, showrooms, schools, clinics, banquet halls.
Independent houses and RC frame apartments with stone and tile floors, in towns with agricultural and light industrial activity nearby.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Jalandhar.
02 / Specification sheet
The numbers, and they do not move by city
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
On a Jalandhar job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / Local conditions
What we see driving Jalandhar briefs
- Large houses, serious rooms
A lot of private houses here are big enough for a dedicated cinema or music room. That means low frequency control is the main event, not an afterthought.
- Workshop machine noise
Presses, buffing and grinding run all day in units close to housing. Enclosure at the source beats treatment on the walls.
- Showrooms and retail
Tall, hard retail spaces where staff have to hold a conversation all day. Ceiling absorption does most of the work.
- One to two days by road
A dedicated truck from Palwal reaches site quickly, and we can send samples ahead of the order.
- Assembly and performance rooms
Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
- School and campus buildings
Large school and college campuses in concrete and tile, with halls carrying assembly and performance.
Architects working in Jalandhar usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Durability
Why the climate in Jalandhar changes the material, not the target
Jalandhar is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Logistics
What the route into Jalandhar actually looks like
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | one to two days |
| Dispatch | 2 to 4 working days |
| To site | one to two days |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly four hundred kilometres. Full loads on a dedicated truck, smaller consignments on a shared vehicle.
500 sq ft, about 46 sq m.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Worth knowing
Four honest warnings before you buy
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Jalandhar
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Jalandhar: questions we are actually asked
Where are the wood wool acoustic panels you supply to Jalandhar actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Jalandhar as the manufacturer rather than through a dealer. Jalandhar is a manufacturing town with an unusually large stock of big private houses, so we end up supplying light industry and high end residential in the same week. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Jalandhar enquiry?
Presses, buffing and grinding run all day in units close to housing. Enclosure at the source beats treatment on the walls. A lot of private houses here are big enough for a dedicated cinema or music room. That means low frequency control is the main event, not an afterthought. Those two things move the build-up far more than the panel figure does.
Will this material last in the Jalandhar climate?
Jalandhar is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
When would material land on a Jalandhar site?
made at: Our own plant, Palwal, Haryana, reaches site in: one to two days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do wood wool acoustic panels fail to help?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
What is the minimum order and how is it packed?
500 sq ft, about 46 sq m. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Send a plan and a section, get a real build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.