Manufactured in India, supplied in Jakarta
Ceiling baffles and clouds in Jakarta
We manufacture ceiling baffles and clouds at our own plant at Palwal in Haryana, India, and supply them into Jakarta. Made at our own plant in India and shipped into Tanjung Priok, inside the city, so the road leg to site is short.
- Material
- 100% PET non-woven, the panel family
- Thickness
- 9 to 24 mm
- Size
- Made to the drawing, standard and custom
- Exposure
- Both faces work, which is why suspended area outperforms the same area laid flat
- Test standard
- ASTM C423
- Lead time
- Confirmed against the drawing
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The material, and what it actually does on a Jakarta job
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. It is how you treat a room with exposed services, where there is no ceiling to line.
Work reaching us from Jakarta is mostly towers and offices, apartments, hotels, hospitals, schools, studios.
Concrete frame with block infill in cities, timber and light construction outside them. Apartment stock shares walls and slabs that were never detailed for two households.
- Vertical baffles Hung on edge in rows. Both faces absorb, so coverage figures based on plan area understate them.
- Horizontal clouds Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
- Mixed with services Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
- What it will not do Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for baffles and clouds are on the main product page. This page covers what that means for a project in Jakarta.
Acoustic ceiling baffles Acoustic ceiling clouds Acoustic ceiling tiles
02 / Specification
The numbers, and they do not move by city
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- EchoCore 151500 GSM. Offices, retail, general
- EchoPro 181800 GSM. Halls, atria, spaces with a target
- EchoMax 222200 GSM. High volume and high occupancy
| Material | 100% PET non-woven, the panel family |
|---|---|
| Thickness | 9 to 24 mm |
| Size | Made to the drawing, standard and custom |
| Exposure | Both faces work, which is why suspended area outperforms the same area laid flat |
| Test standard | ASTM C423 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / Local conditions
The Jakarta conditions that change the answer
- Concrete towers, live interiors
The structure blocks well. The problem is tile, glass and stone inside making the room ring.
- Noise arrives from outside
Traffic and construction reach rooms through glazing and openings long before they come through a wall. Fix the weakest path first.
- Standby generation
Power backup sits close to occupied space in most commercial buildings and runs often enough to matter.
- The port is in the city
Tanjung Priok is close, which keeps the road leg short and the landed cost predictable.
- School and campus buildings
Classrooms are hard, naturally ventilated and open to corridor and street noise, so absorption alone will not fix intelligibility.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate
Why the climate in Jakarta changes the material, not the target
Jakarta is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Supply
How material reaches a Jakarta site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Tanjung Priok, then a short road run into the city |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Tanjung Priok |
| Packing | Flat packed with fixings, sets labelled by row so the install sequence matches the drawing. |
| Lead time | Confirmed against the drawing. Standard sizes 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Tanjung Priok, then a short road run into the city. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Baffles and clouds | 500 sq ft, about 46 sq m |
|---|
Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does.
06 / Worth knowing
What we will tell you that a reseller will not
-
The wrong product for the problem
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Jakarta
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Jakarta: questions we are actually asked
Do you manufacture ceiling baffles and clouds in Jakarta?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Jakarta as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Tanjung Priok, inside the city, so the road leg to site is short. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Jakarta job?
Traffic and construction reach rooms through glazing and openings long before they come through a wall. Fix the weakest path first. The structure blocks well. The problem is tile, glass and stone inside making the room ring. Those two things move the build-up far more than the panel figure does.
Is this the right material for Jakarta conditions?
Jakarta is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
What is the delivery time into Jakarta?
ships from: Palwal, Haryana, India, arrives at: Tanjung Priok, then a short road run into the city, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will ceiling baffles and clouds not do?
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
What is the minimum order and how is it packed?
The same 500 sq ft minimum applies on export. Baffles and clouds, 500 sq ft, about 46 sq m. Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does. Flat packed with fixings, sets labelled by row so the install sequence matches the drawing.
Next step
Send the drawings, get a straight answer
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.