Manufactured in India, supplied in Hyderabad
Acoustic foam and BassBloc in Hyderabad
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Hyderabad. Hyderabad combines large IT campuses, a working film industry and a pharmaceutical manufacturing belt.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The product
What this material is and where it earns its place in Hyderabad
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Hyderabad is mostly IT campuses, film and content studios, pharma plants, hospitals, schools, hotels.
RC frame apartments and gated communities with stone and tile floors, sharing slabs and lift cores.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Hyderabad.
02 / Data sheet
The published figures, unchanged by location
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
What the buildings in Hyderabad do to the specification
- Campus floors at scale
Large open plans with glass and hard flooring, repeated across many buildings. Consistency across the order is the value.
- A working film industry
Shooting floors, dubbing rooms and content spaces where the shell has to isolate before anything else is decided.
- Pharma and clean areas
Manufacturing plant next to controlled spaces, where mechanical noise is a design problem rather than a comfort one.
- Granite and hard ground
Buildings sit on rock, and rock transmits. Structure-borne noise from plant travels further here than people expect.
- The housing stock
RC frame apartments and gated communities with stone and tile floors, sharing slabs and lift cores.
- The studio and content scene
A very large film and dubbing industry with rooms built inside commercial buildings and studio complexes.
Architects working in Hyderabad usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Conditions
Why the climate in Hyderabad changes the material, not the target
Hyderabad is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Supply
Getting it to Hyderabad, with real dates
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | four days |
| Dispatch | 2 to 4 working days |
| To site | four days |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly fifteen hundred kilometres, normally four days on a dedicated truck.
200 sq ft for acoustic foam, 300 sq ft for BassBloc, 10 pieces for bass traps.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Straight talk
Where this goes wrong, said plainly
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Hyderabad certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
The material in real interiors
Hyderabad: questions we are actually asked
Where are the acoustic foam and BassBloc you supply to Hyderabad actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Hyderabad as the manufacturer rather than through a dealer. Hyderabad combines large IT campuses, a working film industry and a pharmaceutical manufacturing belt. You buy at factory prices with one consistent batch across the order.
Why would a Hyderabad build-up differ from anywhere else?
Large open plans with glass and hard flooring, repeated across many buildings. Consistency across the order is the value. Shooting floors, dubbing rooms and content spaces where the shell has to isolate before anything else is decided. Those two things move the build-up far more than the panel figure does.
Is this the right material for Hyderabad conditions?
Hyderabad is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
When would material land on a Hyderabad site?
made at: Our own plant, Palwal, Haryana, reaches site in: four days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will acoustic foam and BassBloc not do?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
What is the minimum order and how is it packed?
200 sq ft for acoustic foam, 300 sq ft for BassBloc, 10 pieces for bass traps. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Send a plan and a section, get a real build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.