For projects in Hungary
Auditorium acoustics and soundproofing in Hungary
A large hard volume where speech falls apart long before anyone calls the room echoey. The target is intelligibility at the back row, which is a reverberation and early reflection problem, not a loudspeaker problem. Church buildings, concert halls and civic rooms are stone and plaster volumes with long decay.
- Reverberation time
- Set against use. Speech and music want different numbers, and a dual use hall needs a decision.
- Early reflections
- Shaped surfaces that send energy to the rear seats rather than absorbing everything.
- Rear wall
- The single worst surface in most halls, and the first one to treat.
- Quote
- From a plan and a section, within 48 hours
01 / Start here
The product, described honestly, for a Hungary brief
A large hard volume where speech falls apart long before anyone calls the room echoey. The target is intelligibility at the back row, which is a reverberation and early reflection problem, not a loudspeaker problem.
Church buildings, concert halls and civic rooms are stone and plaster volumes with long decay.
Work reaching us from Hungary is mostly automotive plants, offices and service centres, hotels, panel block housing, schools, hospitals.
- Landlocked, so plan the inland leg Koper then rail and road. We quote the sea leg and the inland leg separately so the programme runs on real dates.
- Automotive plant noise Presses, robots and conveyors are low frequency and structure-borne. Enclosure at the source rather than absorption on a far wall.
- Panel block housing Prefabricated concrete passes speech and footfall between flats through thin connected elements. Mass is the only reliable answer.
- Reverberation time Set against use. Speech and music want different numbers, and a dual use hall needs a decision.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for auditorium acoustics are on the main product page. This page covers what that means for a project in Hungary.
02 / The build-up
The build-up, layer by layer
-
Layer 1
Wood wool acoustic panels
Wood fibre bound into a rigid board with an open texture. In Hungary, district heating and split units, with condensers in courtyards that reflect noise back into flats.
Direct fix. Mechanically fixed to the soffit or wall. Durable and simple.
-
Layer 2
Ceiling baffles and clouds
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. In Hungary, church buildings, concert halls and civic rooms are stone and plaster volumes with long decay.
Horizontal clouds. Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
-
Layer 3
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Hungary, school buildings are hard surfaced with long corridors and gymnasiums serving as halls.
Over a resilient underlay. Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
Architects working in Hungary usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
03 / In this market
What decides the build-up in Hungary
- Landlocked, so plan the inland leg
Koper then rail and road. We quote the sea leg and the inland leg separately so the programme runs on real dates.
- Automotive plant noise
Presses, robots and conveyors are low frequency and structure-borne. Enclosure at the source rather than absorption on a far wall.
- Panel block housing
Prefabricated concrete passes speech and footfall between flats through thin connected elements. Mass is the only reliable answer.
- Budapest conversions
Old buildings turned into offices and hotels, with tall rooms and hard plaster that hold sound far too long.
- Assembly and performance rooms
Church buildings, concert halls and civic rooms are stone and plaster volumes with long decay.
- School and campus buildings
School buildings are hard surfaced with long corridors and gymnasiums serving as halls.
04 / Room by room
Where the money goes on a Hungary project
-
Reverberation time
Set against use. Speech and music want different numbers, and a dual use hall needs a decision. Koper then rail and road. We quote the sea leg and the inland leg separately so the programme runs on real dates.
- Wood wool acoustic panels, 1200 x 600 mm
- Wooden slat acoustic panels, 13-3, 14-2, 28-4 and 59-5
- PET felt acoustic panels, 4 to 24 mm
-
Early reflections
Shaped surfaces that send energy to the rear seats rather than absorbing everything. Presses, robots and conveyors are low frequency and structure-borne. Enclosure at the source rather than absorption on a far wall.
- Wood wool acoustic panels, 20 mm
- Wooden slat acoustic panels, 2440 x 192 mm and 2440 x 128 mm
- PET felt acoustic panels, 1220 x 2440 mm standard, 4 x 8 ft
-
Rear wall
The single worst surface in most halls, and the first one to treat. Prefabricated concrete passes speech and footfall between flats through thin connected elements. Mass is the only reliable answer.
- Wood wool acoustic panels, 400 kg per cubic metre
- Wooden slat acoustic panels, 14, 16 and 18 mm
- PET felt acoustic panels, 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
04 / Durability
The Hungary climate decides the material list
Hungary is cool and damp, with long heating seasons and cold external walls, and that narrows the material list before acoustics is discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The failure we design against here is condensation behind linings in older, poorly insulated stock.
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
06 / Before you buy
The six errors that cost the most
-
Absorbing the whole room and losing the back rows
Small on the drawing, expensive on site, and almost always found after handover.
-
Adding speakers to fix a reverberation problem
This is the one that comes back as a second fit-out rather than a snag.
-
Ignoring the rear wall because it is behind the audience
It sounds like a small detail until the room is finished and the complaint arrives.
-
Treating it as a generic Hungary job
Koper then rail and road. We quote the sea leg and the inland leg separately so the programme runs on real dates.
05 / Supply
How material reaches a Hungary site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Koper, then rail and road inland |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Koper, then rail |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Koper, then rail and road inland. Air freight for samples and urgent quantities.
Questions from Hungary projects
What makes auditorium acoustics and soundproofing different in Hungary?
Church buildings, concert halls and civic rooms are stone and plaster volumes with long decay. Koper then rail and road. We quote the sea leg and the inland leg separately so the programme runs on real dates.
Where should the budget go first on a Hungary project?
Reverberation time. Set against use. Speech and music want different numbers, and a dual use hall needs a decision. Early reflections. Shaped surfaces that send energy to the rear seats rather than absorbing everything.
Do you have an office or installation team in Hungary?
No. We manufacture in India and supply into Hungary. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Hungary site?
ships from: Palwal, Haryana, India, arrives at: Koper, then rail and road inland, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Absorbing the whole room and losing the back rows. Adding speakers to fix a reverberation problem.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send the drawings, get a straight answer
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.