Manufactured in India, supplied in Houston
Acoustic carpet and rugs in Houston
We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Houston. Made at our own plant in India and shipped straight into the Port of Houston.
- Tile size
- 500 x 500 mm
- Thickness
- 4 mm
- Face
- High density polyester
- Backing
- Felt
- Pack coverage
- 64 sq ft per pack
- Lead time
- 4 to 7 working days
- Minimum order
- From 320 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / What it is
The material, and what it actually does on a Houston job
A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.
Work reaching us from Houston is mostly control rooms and plant, corporate offices, medical and clinical spaces, schools, home theatres.
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
- Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
- Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
- Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
- What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Houston.
02 / Specification
The numbers, and they do not move by city
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- Standard tile4 mm. Offices, classrooms, studios, corridors
| Tile size | 500 x 500 mm |
|---|---|
| Thickness | 4 mm |
| Face | High density polyester |
| Backing | Felt |
| Pack coverage | 64 sq ft per pack |
| Boxed | 20 kg, 55 x 55 x 15 cm |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / What drives the brief
The Houston conditions that change the answer
- Humidity and long transit
Gulf humidity is hard on mineral products. Our PET felt does not absorb moisture, shed fibre or feed mould, and it travels a long sea leg sealed and dry.
- The port is the advantage
Container arrives in Houston itself, so there is no long domestic trucking leg. That is the practical reason a factory in India can be competitive here on landed cost.
- Light frame walls behave differently
Gypsum on studs is not masonry. It is lighter, it resonates, and it passes low frequency far more easily, so the answer is added mass and a decoupled layer rather than more absorption.
- Industrial noise is a mass problem
Compressors, generators and process plant are low frequency and structure-borne. Panels on a wall will not touch that, and we will tell you so rather than sell them to you.
- Assembly and performance rooms
Churches, school gyms and multipurpose halls double as performance spaces, which means a room designed for neither speech nor music has to carry both.
- The housing stock
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
Architects working in Houston usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate and durability
Durability in Houston, before acoustics is discussed
Houston is hot dry summers and mild wet winters, and that narrows the sensible material list before acoustics is even discussed.
The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing.
The risk we design against here is seasonal movement in timber and winter damp in unheated stock.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Supply
How material reaches a Houston site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port of Houston, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Port of Houston |
| Packing | Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. The sea leg to the US Gulf is long, so plan the full door to door window into the programme. We give you real dates, not optimistic ones.
Sea freight direct into the Port of Houston, then a short road run to site. Air freight for samples, colour approvals and genuinely urgent quantities.
The same minimums apply on export.
| Carpet tiles | 320 sq ft, about 30 sq m |
|---|---|
| Rugs | 500 sq ft, about 46 sq m |
A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.
06 / Worth knowing
The things worth knowing before you place the order
-
The wrong product for the problem
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Houston certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Houston: questions we are actually asked
Is there a Houston factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Houston as the manufacturer rather than through a dealer. Made at our own plant in India and shipped straight into the Port of Houston. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Houston job?
Container arrives in Houston itself, so there is no long domestic trucking leg. That is the practical reason a factory in India can be competitive here on landed cost. Gypsum on studs is not masonry. It is lighter, it resonates, and it passes low frequency far more easily, so the answer is added mass and a decoupled layer rather than more absorption. Those two things move the build-up far more than the panel figure does.
Does Houston weather shorten the life of this material?
Houston is hot dry summers and mild wet winters. The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing. The failure we design against here is seasonal movement in timber and winter damp in unheated stock.
How quickly can material reach a site in Houston?
ships from: Palwal, Haryana, India, arrives at: Port of Houston, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg to the US Gulf is long, so plan the full door to door window into the programme. We give you real dates, not optimistic ones.
What will acoustic carpet and rugs not do?
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
What is the minimum order and how is it packed?
The same minimums apply on export. Carpet tiles, 320 sq ft, about 30 sq m. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Next step
Tell us the room, we will tell you the build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.