Manufactured in India, supplied in Hawaii
Ceiling baffles and clouds in Hawaii
We manufacture ceiling baffles and clouds at our own plant at Palwal in Haryana, India, and supply them into Hawaii. Made at our own plant in India and shipped into Honolulu.
- Material
- 100% PET non-woven, the panel family
- Thickness
- 9 to 24 mm
- Size
- Made to the drawing, standard and custom
- Exposure
- Both faces work, which is why suspended area outperforms the same area laid flat
- Test standard
- ASTM C423
- Lead time
- Confirmed against the drawing
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / What it is
The material, and what it actually does on a Hawaii job
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. It is how you treat a room with exposed services, where there is no ceiling to line.
Work reaching us from Hawaii is mostly resorts and hotels, timber housing, offices, schools, clinics, venues.
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
- Vertical baffles Hung on edge in rows. Both faces absorb, so coverage figures based on plan area understate them.
- Horizontal clouds Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
- Mixed with services Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
- What it will not do Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for baffles and clouds are on the main product page. This page covers what that means for a project in Hawaii.
Acoustic ceiling baffles Acoustic ceiling clouds Acoustic ceiling tiles
02 / Data sheet
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- EchoCore 151500 GSM. Offices, retail, general
- EchoPro 181800 GSM. Halls, atria, spaces with a target
- EchoMax 222200 GSM. High volume and high occupancy
| Material | 100% PET non-woven, the panel family |
|---|---|
| Thickness | 9 to 24 mm |
| Size | Made to the drawing, standard and custom |
| Exposure | Both faces work, which is why suspended area outperforms the same area laid flat |
| Test standard | ASTM C423 |
Where a consultant is already engaged on a Hawaii project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / Local conditions
What we see driving Hawaii briefs
- A genuinely long route
This is one of the longest legs we run. Ordering to a real schedule matters more here than anywhere, so we quote the full window.
- Buildings open to the trade winds
Louvres, lanais and openable walls mean there is often no envelope to isolate. We will tell you what cannot be fixed rather than sell around it.
- Salt air is relentless
PET felt does not absorb moisture, rot or corrode, which matters where almost everything else degrades quickly.
- Inter-island freight
Material bound for a neighbouring island has a second leg. Tell us and we pack for it.
- School and campus buildings
Public school buildings run long corridors with hard floors and lay-in tile ceilings that were chosen for cost, not for speech. Classroom reverberation and corridor spill are the two complaints, and both respond to ceiling area rather than wall panels.
Architects working in Hawaii usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate and durability
Why the climate in Hawaii changes the material, not the target
Hawaii is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Route to site
Getting it to Hawaii, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Honolulu, then road or inter-island onward |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Honolulu |
| Packing | Flat packed with fixings, sets labelled by row so the install sequence matches the drawing. |
| Lead time | Confirmed against the drawing. Standard sizes 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Honolulu, then road or inter-island onward. Air freight for samples only.
The same 500 sq ft minimum applies on export.
| Baffles and clouds | 500 sq ft, about 46 sq m |
|---|
Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does.
06 / Before you buy
Four honest warnings before you buy
-
The wrong product for the problem
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Local approvals that nobody actually holds
We hold no Hawaii certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Hawaii: questions we are actually asked
Do you manufacture ceiling baffles and clouds in Hawaii?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Hawaii as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Honolulu. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Hawaii enquiry?
This is one of the longest legs we run. Ordering to a real schedule matters more here than anywhere, so we quote the full window. Louvres, lanais and openable walls mean there is often no envelope to isolate. We will tell you what cannot be fixed rather than sell around it. Those two things move the build-up far more than the panel figure does.
How does the Hawaii climate affect this product?
Hawaii is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
What is the delivery time into Hawaii?
ships from: Palwal, Haryana, India, arrives at: Honolulu, then road or inter-island onward, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What will ceiling baffles and clouds not do?
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Is there a minimum order, and how does it arrive?
The same 500 sq ft minimum applies on export. Baffles and clouds, 500 sq ft, about 46 sq m. Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does. Flat packed with fixings, sets labelled by row so the install sequence matches the drawing.
Next step
Send the drawings, get a straight answer
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.