Manufactured in India, supplied in Ghana
Wood wool acoustic panels in Ghana
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Ghana. Made at our own plant in India and shipped into Tema, which sits next to Accra, so the road leg for most work is short.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / Start here
What this material is and where it earns its place in Ghana
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Ghana is mostly offices, hotels, places of assembly, schools, hospitals, apartments, studios.
Concrete and block construction with hard floors, in compounds and estates where units sit close together.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Ghana.
02 / The numbers
One specification sheet, the same in every market
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
On a Ghana job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What the buildings in Ghana do to the specification
- Generators run regularly
Standby generation sits close to occupied space in most commercial buildings. Enclosure at the source is what works, not absorption on a wall.
- New concrete construction
Walls carry mass, so the recurring problem is hard, live interiors rather than sound passing between rooms.
- Large assembly spaces
Halls and places of assembly used by big congregations, where intelligibility fails long before anyone calls the room echoey.
- Tema is next to the market
The port sits beside Accra, so most deliveries have almost no inland leg.
- Assembly and performance rooms
Church buildings and event halls carry amplified music at high level in hard volumes.
- School and campus buildings
Classrooms are hard and naturally ventilated with large class sizes and open corridors.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate
Why the climate in Ghana changes the material, not the target
Ghana is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Logistics
What the route into Ghana actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Tema, next to Accra, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Tema |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Tema, then a short road run to site. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Local approvals that nobody actually holds
We hold no Ghana certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Ghana: questions we are actually asked
Are these wood wool acoustic panels made in Ghana?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Ghana as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Tema, which sits next to Accra, so the road leg for most work is short. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Ghana enquiry?
Standby generation sits close to occupied space in most commercial buildings. Enclosure at the source is what works, not absorption on a wall. Walls carry mass, so the recurring problem is hard, live interiors rather than sound passing between rooms. Those two things move the build-up far more than the panel figure does.
Does Ghana weather shorten the life of this material?
Ghana is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
What is the delivery time into Ghana?
ships from: Palwal, Haryana, India, arrives at: Tema, next to Accra, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy wood wool acoustic panels for?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
What quantity do we have to order, and in what packaging?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Drawings in, BOQ and a delivered date out
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.