Home > Ghana > Acoustic carpet and rugs

Acoustic carpet tiles and rugs on a modern floor

Manufactured in India, supplied in Ghana

Acoustic carpet and rugs in Ghana

We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Ghana. Made at our own plant in India and shipped into Tema, which sits next to Accra, so the road leg for most work is short.

Tile size
500 x 500 mm
Thickness
4 mm
Face
High density polyester
Backing
Felt
Pack coverage
64 sq ft per pack
Lead time
4 to 7 working days
Minimum order
From 320 sq ft
  • Made at our own plant, Palwal, Haryana, India
  • One batch across the order, no blending between runs
  • Test reports sent on request, not just quoted

We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.

01 / The product

What this is, and what it changes in a Ghana room

A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.

Work reaching us from Ghana is mostly offices, hotels, places of assembly, schools, hospitals, apartments, studios.

Concrete and block construction with hard floors, in compounds and estates where units sit close together.

  • Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
  • Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
  • Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
  • What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

Full specification

Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Ghana.

Acoustic carpets and rugs

02 / Specification sheet

The numbers, and they do not move by city

Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.

  • Standard tile4 mm. Offices, classrooms, studios, corridors
Acoustic carpet and rugs: published specification
Tile size500 x 500 mm
Thickness4 mm
FaceHigh density polyester
BackingFelt
Pack coverage64 sq ft per pack
Boxed20 kg, 55 x 55 x 15 cm

Where a consultant is already engaged on a Ghana project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.

03 / In this market

What the buildings in Ghana do to the specification

  • Generators run regularly

    Standby generation sits close to occupied space in most commercial buildings. Enclosure at the source is what works, not absorption on a wall.

  • New concrete construction

    Walls carry mass, so the recurring problem is hard, live interiors rather than sound passing between rooms.

  • Large assembly spaces

    Halls and places of assembly used by big congregations, where intelligibility fails long before anyone calls the room echoey.

  • Tema is next to the market

    The port sits beside Accra, so most deliveries have almost no inland leg.

  • Assembly and performance rooms

    Church buildings and event halls carry amplified music at high level in hard volumes.

  • The housing stock

    Concrete and block construction with hard floors, in compounds and estates where units sit close together.

Architects working in Ghana usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.

04 / Conditions

Durability in Ghana, before acoustics is discussed

Ghana is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.

Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.

The risk we design against here is mould, sagging fabric finishes and swelling in timber.

Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.

05 / Route to site

Getting it to Ghana, with real dates

Supply into Ghana
Ships fromPalwal, Haryana, India
Arrives atTema, next to Accra, then a short road run to site
Dispatch4 to 7 working days
FreightSea via Tema
PackingBoxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Lead time4 to 7 working days.

Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.

Sea freight into Tema, then a short road run to site. Air freight for samples and urgent quantities.

The same minimums apply on export.

Minimum order, acoustic carpet and rugs
Carpet tiles320 sq ft, about 30 sq m
Rugs500 sq ft, about 46 sq m

A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.

06 / Straight talk

Where this goes wrong, said plainly

  • The wrong product for the problem

    Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

  • Coverage bought instead of a target

    Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.

  • Local approvals that nobody actually holds

    We hold no Ghana certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.

FAQ

Ghana: questions we are actually asked

Where are the acoustic carpet and rugs you supply to Ghana actually made?

No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Ghana as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Tema, which sits next to Accra, so the road leg for most work is short. You buy at factory prices with one consistent batch across the order.

What decides the specification for a Ghana project?

Standby generation sits close to occupied space in most commercial buildings. Enclosure at the source is what works, not absorption on a wall. Walls carry mass, so the recurring problem is hard, live interiors rather than sound passing between rooms. Those two things move the build-up far more than the panel figure does.

Does Ghana weather shorten the life of this material?

Ghana is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.

How quickly can material reach a site in Ghana?

ships from: Palwal, Haryana, India, arrives at: Tema, next to Accra, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.

What will acoustic carpet and rugs not do?

Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

Is there a minimum order, and how does it arrive?

The same minimums apply on export. Carpet tiles, 320 sq ft, about 30 sq m. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.

Next step

Tell us the room, we will tell you the build-up

A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.