Manufactured in India, supplied in Germany
Wooden slat acoustic panels in Germany
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Germany. Made at our own plant in India, shipped in container loads to German sites, specified against your drawings before anything leaves the factory.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / The product
What you are buying, and what it fixes in Germany
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Germany is mostly offices, studios, clubs, hotels, schools, clinics, industrial plant rooms.
Altbau blocks have solid masonry walls and timber joist floors, so airborne noise is controlled but footfall is not. Neubau is concrete with better floors and much harder surfaces.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Germany.
02 / Specification sheet
One specification sheet, the same in every market
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
On a Germany job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What the buildings in Germany do to the specification
- Two building stocks
Altbau apartments with timber floors pass noise between homes. Post-war concrete holds it in and rings. The same room needs a different answer depending on which one you are in.
- Specified acoustics
Most German jobs arrive with an acoustician already involved. Send us the target values and we will tell you which build-up gets there, and which one will not.
- Container quantities
Fit-outs across several floors or sites are cheaper by container. We quote full loads and stage deliveries against your programme.
- Winter build programmes
Sealed, insulated rooms sound dead in the wrong way. Absorption has to be balanced, not maximised, once the envelope is tight.
- Assembly and performance rooms
Concert halls, church buildings and civic Saal spaces are long-reverberation rooms where any intervention has to be reversible and visually disciplined.
If you are specifying for a Germany project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate and durability
What the Germany climate rules in and rules out
Germany is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Route to site
Getting it to Germany, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Hamburg or Bremerhaven, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Hamburg |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we say so before you order.
Sea freight into Hamburg or Bremerhaven, then road to site anywhere in Germany. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Straight talk
What we will tell you that a reseller will not
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Local approvals that nobody actually holds
We hold no Germany certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Germany: questions we are actually asked
Are these wooden slat acoustic panels made in Germany?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Germany as the manufacturer rather than through a dealer. Made at our own plant in India, shipped in container loads to German sites, specified against your drawings before anything leaves the factory. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Germany enquiry?
Altbau apartments with timber floors pass noise between homes. Post-war concrete holds it in and rings. The same room needs a different answer depending on which one you are in. Most German jobs arrive with an acoustician already involved. Send us the target values and we will tell you which build-up gets there, and which one will not. Those two things move the build-up far more than the panel figure does.
How does the Germany climate affect this product?
Germany is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
When would material land on a Germany site?
ships from: Palwal, Haryana, India, arrives at: Hamburg or Bremerhaven, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we say so before you order.
What should you not buy wooden slat acoustic panels for?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
What is the minimum order and how is it packed?
The same 500 sq ft minimum applies on export. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Send a plan and a section, get a real build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.