Manufactured in India, supplied in France
Acoustic foam and BassBloc in France
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into France. Made at our own plant in India, shipped in container loads to French sites, specified against your drawings before anything leaves the factory.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / What it is
The material, and what it actually does on a France job
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from France is mostly apartments, hotels, restaurants, offices, studios, schools, clinics.
Haussmannian and later blocks stack flats with masonry walls and timber or concrete floors. Shared circulation and light wells carry sound between homes.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in France.
02 / Specification
The numbers, and they do not move by city
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
The France conditions that change the answer
- Retrofit, not new build
Most rooms already exist, so the build-up has to work within the depth and the finishes you already have.
- Timber floors and divided apartments
Footfall and speech move between homes through the floor. Mass plus a resilient layer beats any surface treatment underneath.
- Hospitality volume
Restaurants and hotels take the acoustic complaints personally, because guests write them down. Absorption goes where it will not fight the design.
- Seasonal programmes
Coastal and resort work runs to a fixed opening date. We give honest dispatch and transit dates so the fit-out is not waiting on a container.
- The housing stock
Haussmannian and later blocks stack flats with masonry walls and timber or concrete floors. Shared circulation and light wells carry sound between homes.
- The studio and content scene
Studios sit inside residential blocks and converted commercial spaces where the neighbour decides the achievable level.
If you are specifying for a France project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate
What the France climate rules in and rules out
France is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Logistics
How material reaches a France site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Le Havre, Marseille or Antwerp, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Le Havre |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we say so before you order.
Sea freight into Le Havre, Marseille or Antwerp, then road to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Read this first
Four honest warnings before you buy
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Suppliers who imply a France presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
07 / In projects
The material in real interiors
France: questions we are actually asked
Is there a France factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into France as the manufacturer rather than through a dealer. Made at our own plant in India, shipped in container loads to French sites, specified against your drawings before anything leaves the factory. You buy at factory prices with one consistent batch across the order.
Why would a France build-up differ from anywhere else?
Most rooms already exist, so the build-up has to work within the depth and the finishes you already have. Footfall and speech move between homes through the floor. Mass plus a resilient layer beats any surface treatment underneath. Those two things move the build-up far more than the panel figure does.
Will this material last in the France climate?
France is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
What is the delivery time into France?
ships from: Palwal, Haryana, India, arrives at: Le Havre, Marseille or Antwerp, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we say so before you order.
What will acoustic foam and BassBloc not do?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
What quantity do we have to order, and in what packaging?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Drawings in, BOQ and a delivered date out
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.