Manufactured in India, supplied in France
Acoustic carpet and rugs in France
We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into France. Made at our own plant in India, shipped in container loads to French sites, specified against your drawings before anything leaves the factory.
- Tile size
- 500 x 500 mm
- Thickness
- 4 mm
- Face
- High density polyester
- Backing
- Felt
- Pack coverage
- 64 sq ft per pack
- Lead time
- 4 to 7 working days
- Minimum order
- From 320 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / What it is
The material, and what it actually does on a France job
A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.
Work reaching us from France is mostly apartments, hotels, restaurants, offices, studios, schools, clinics.
Haussmannian and later blocks stack flats with masonry walls and timber or concrete floors. Shared circulation and light wells carry sound between homes.
- Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
- Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
- Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
- What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in France.
02 / Data sheet
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Standard tile4 mm. Offices, classrooms, studios, corridors
| Tile size | 500 x 500 mm |
|---|---|
| Thickness | 4 mm |
| Face | High density polyester |
| Backing | Felt |
| Pack coverage | 64 sq ft per pack |
| Boxed | 20 kg, 55 x 55 x 15 cm |
Where a consultant is already engaged on a France project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / On the ground
The France conditions that change the answer
- Hospitality volume
Restaurants and hotels take the acoustic complaints personally, because guests write them down. Absorption goes where it will not fight the design.
- Retrofit, not new build
Most rooms already exist, so the build-up has to work within the depth and the finishes you already have.
- Timber floors and divided apartments
Footfall and speech move between homes through the floor. Mass plus a resilient layer beats any surface treatment underneath.
- Seasonal programmes
Coastal and resort work runs to a fixed opening date. We give honest dispatch and transit dates so the fit-out is not waiting on a container.
- Assembly and performance rooms
Churches, salles des fetes and civic auditoriums are stone and plaster volumes with very long decay.
- The housing stock
Haussmannian and later blocks stack flats with masonry walls and timber or concrete floors. Shared circulation and light wells carry sound between homes.
Architects working in France usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Conditions
The France climate decides the material list
France is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Logistics
What the route into France actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Le Havre, Marseille or Antwerp, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Le Havre |
| Packing | Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we say so before you order.
Sea freight into Le Havre, Marseille or Antwerp, then road to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Carpet tiles | 320 sq ft, about 30 sq m |
|---|---|
| Rugs | 500 sq ft, about 46 sq m |
A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.
06 / Before you buy
Where this goes wrong, said plainly
-
The wrong product for the problem
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to France
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
France: questions we are actually asked
Are these acoustic carpet and rugs made in France?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into France as the manufacturer rather than through a dealer. Made at our own plant in India, shipped in container loads to French sites, specified against your drawings before anything leaves the factory. You buy at factory prices with one consistent batch across the order.
What decides the specification for a France project?
Most rooms already exist, so the build-up has to work within the depth and the finishes you already have. Footfall and speech move between homes through the floor. Mass plus a resilient layer beats any surface treatment underneath. Those two things move the build-up far more than the panel figure does.
How does the France climate affect this product?
France is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
What is the delivery time into France?
ships from: Palwal, Haryana, India, arrives at: Le Havre, Marseille or Antwerp, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we say so before you order.
Where do acoustic carpet and rugs fail to help?
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
What is the minimum order and how is it packed?
The same minimums apply on export. Carpet tiles, 320 sq ft, about 30 sq m. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Next step
Send a plan and a section, get a real build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.