For projects in Diu
Hospital and healthcare acoustics in Diu
Two duties at once: privacy where confidential conversations happen, and a lower noise floor where people are trying to rest. Hygiene and cleanability rule out a lot of products before acoustics is even discussed. Dense industrial estates with compressors, presses and generator sets close to offices, canteens and housing.
- Consulting room privacy
- Speech privacy between rooms, which is partition, door and ceiling void work.
- Ward noise floor
- Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling.
- Cleanability
- Non shedding, non absorbent surfaces that survive a cleaning regime.
- Quote
- From a plan and a section, within 48 hours
01 / The product
What this is, and what it changes in a Diu room
Two duties at once: privacy where confidential conversations happen, and a lower noise floor where people are trying to rest. Hygiene and cleanability rule out a lot of products before acoustics is even discussed.
Dense industrial estates with compressors, presses and generator sets close to offices, canteens and housing.
Work reaching us from Diu is mostly hotels and guest houses, restaurants and bars, heritage properties, offices, clinics.
- Salt air is relentless PET felt does not absorb moisture, rot or corrode. On an exposed coast that is the whole material selection argument.
- Season dates are fixed Work has to finish before the season opens. Real dispatch and transit dates matter more than a marginally better price.
- Heritage stone buildings Thick masonry with hard finishes that hold sound for a long time, and a structure that usually cannot be altered.
- Consulting room privacy Speech privacy between rooms, which is partition, door and ceiling void work.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for healthcare acoustics are on the main product page. This page covers what that means for a project in Diu.
02 / The build-up
The build-up, layer by layer
-
Layer 1
PET felt acoustic panels
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. In Diu, dense industrial estates with compressors, presses and generator sets close to offices, canteens and housing.
Over a porous backing. Panel over mineral or PET backing where the room needs genuine low mid control.
-
Layer 2
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Diu, auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
Floor, floating. Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
-
Layer 3
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Diu, classrooms are concrete and tile with bare walls and high ceilings, and class sizes push levels up. Corridors act as reverberation chambers that feed every room off them.
Wall array. Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
If you are specifying for a Diu project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
03 / In this market
What decides the build-up in Diu
- Salt air is relentless
PET felt does not absorb moisture, rot or corrode. On an exposed coast that is the whole material selection argument.
- Season dates are fixed
Work has to finish before the season opens. Real dispatch and transit dates matter more than a marginally better price.
- Heritage stone buildings
Thick masonry with hard finishes that hold sound for a long time, and a structure that usually cannot be altered.
- Sensible quantities
A small market does not need a full container. We would rather quote a part load that works.
- Plant and HVAC
Dense industrial estates with compressors, presses and generator sets close to offices, canteens and housing.
04 / Room by room
Where the money goes on a Diu project
-
Consulting room privacy
Speech privacy between rooms, which is partition, door and ceiling void work. PET felt does not absorb moisture, rot or corrode. On an exposed coast that is the whole material selection argument.
- PET felt acoustic panels, 100% PET non-woven, no added binder
- Acoustic carpet and rugs, 4 mm
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
-
Ward noise floor
Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling. Work has to finish before the season opens. Real dispatch and transit dates matter more than a marginally better price.
- PET felt acoustic panels, 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Acoustic carpet and rugs, High density polyester
- Acoustic panels, ASTM C423
-
Cleanability
Non shedding, non absorbent surfaces that survive a cleaning regime. Thick masonry with hard finishes that hold sound for a long time, and a structure that usually cannot be altered.
- PET felt acoustic panels, 4 to 24 mm
- Acoustic carpet and rugs, Felt
- Acoustic panels, 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
04 / Conditions
What the Diu climate rules in and rules out
Diu is hot summers, mild winters and a distinct wet season, and that narrows the material list before acoustics is discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The failure we design against here is wet-season humidity behind linings.
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
06 / Straight talk
Six mistakes that turn into a second fit-out
-
Fabric wrapped products in a clinical area
Enclose the machine, break the vibration path, then deal with what is left. Doing it in the other order costs more and achieves less.
-
Absorption used where privacy was the requirement
If the complaint is being overheard, no amount of absorption inside the room will fix it. That is a partition job and we will say so.
-
Ceiling void left open above a partition
A treated wall under a bare hard ceiling gives you a fraction of the reduction you paid for, and the room still sounds wrong.
-
Treating it as a generic Diu job
PET felt does not absorb moisture, rot or corrode. On an exposed coast that is the whole material selection argument.
05 / Logistics
Getting it to Diu, with real dates
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | three days |
| Dispatch | 2 to 4 working days |
| To site | three days |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly twelve hundred and fifty kilometres, normally three days on a dedicated truck.
Questions from Diu projects
What makes hospital and healthcare acoustics different in Diu?
Dense industrial estates with compressors, presses and generator sets close to offices, canteens and housing. PET felt does not absorb moisture, rot or corrode. On an exposed coast that is the whole material selection argument.
Where should the budget go first on a Diu project?
Consulting room privacy. Speech privacy between rooms, which is partition, door and ceiling void work. Ward noise floor. Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling.
Do you have an office or installation team in Diu?
No. We manufacture in India and supply into Diu. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Diu site?
made at: Our own plant, Palwal, Haryana, reaches site in: three days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Fabric wrapped products in a clinical area. Absorption used where privacy was the requirement.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send a plan and a section, get a real build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.