For projects in Dibrugarh
Venue and restaurant acoustics in Dibrugarh
Two different jobs that get quoted as one: keeping bass inside the building for the neighbours, and making the room comfortable enough that guests can talk. Solving one does nothing for the other. Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
- Containment
- Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope.
- Table level comfort
- Absorption at the ceiling so guests stop raising their voices at each other.
- Entrance and service
- Doors, lobbies and extract paths, which is where most of the leakage actually is.
- Quote
- From a plan and a section, within 48 hours
01 / What it is
The material, and what it actually does on a Dibrugarh job
Two different jobs that get quoted as one: keeping bass inside the building for the neighbours, and making the room comfortable enough that guests can talk. Solving one does nothing for the other.
Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
Work reaching us from Dibrugarh is mostly tea processing units, energy sector offices, hospitals, colleges, hotels, assembly halls.
- Processing machinery Driers, sorters and fans running continuously in humid buildings. Enclosure at the source is the reliable answer.
- Very high humidity PET felt does not absorb moisture, shed fibre or feed mould, which matters in a climate where mineral products fail quickly.
- A long supply route Five days by road, confirmed before dispatch, and packed for the journey rather than for a short transfer.
- Containment Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for venue soundproofing are on the main product page. This page covers what that means for a project in Dibrugarh.
Nightclub and venue soundproofing SoundBlanket mass loaded vinyl
02 / The build-up
How the layers stack, from the structure inwards
-
Layer 1
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Dibrugarh, split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
Floating floor. Resilient layer and deck, to break impact energy before it reaches the structure.
-
Layer 2
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Dibrugarh, auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
Wall array. Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
-
Layer 3
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Dibrugarh, schools and colleges are naturally ventilated with open corridors and large class sizes.
Loose lay on tackifier. Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
For a Dibrugarh practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
03 / In this market
What decides the build-up in Dibrugarh
- Processing machinery
Driers, sorters and fans running continuously in humid buildings. Enclosure at the source is the reliable answer.
- Very high humidity
PET felt does not absorb moisture, shed fibre or feed mould, which matters in a climate where mineral products fail quickly.
- A long supply route
Five days by road, confirmed before dispatch, and packed for the journey rather than for a short transfer.
- Seismic and flood prone
Buildings are designed to move and often raised. A build-up must respect both rather than fight them.
- Assembly and performance rooms
Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
04 / Room by room
Where the money goes on a Dibrugarh project
-
Containment
Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope. Driers, sorters and fans running continuously in humid buildings. Enclosure at the source is the reliable answer.
- SoundBlanket mass loaded vinyl, 2100 kg per cubic metre
- Wooden slat acoustic panels, 13-3, 14-2, 28-4 and 59-5
- Acoustic carpet and rugs, High density polyester
-
Table level comfort
Absorption at the ceiling so guests stop raising their voices at each other. PET felt does not absorb moisture, shed fibre or feed mould, which matters in a climate where mineral products fail quickly.
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Wooden slat acoustic panels, 2440 x 192 mm and 2440 x 128 mm
- Acoustic carpet and rugs, Felt
-
Entrance and service
Doors, lobbies and extract paths, which is where most of the leakage actually is. Five days by road, confirmed before dispatch, and packed for the journey rather than for a short transfer.
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Wooden slat acoustic panels, 14, 16 and 18 mm
- Acoustic carpet and rugs, 64 sq ft per pack
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
04 / Durability
The Dibrugarh climate decides the material list
Dibrugarh is warm and humid through most of the year, with a long wet season, and that narrows the material list before acoustics is discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The failure we design against here is mould, sagging fabric finishes and swelling in timber.
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
06 / Straight talk
The six errors that cost the most
-
Panels on the wall as a neighbour noise solution
It sounds like a small detail until the room is finished and the complaint arrives.
-
A lobby with both doors able to open at once
A gap undoes the partition it sits in. Sealing is the cheapest line on the quote and the first one to get cut.
-
Extract ducting that bypasses every wall you built
Enclose the machine, break the vibration path, then deal with what is left. Doing it in the other order costs more and achieves less.
-
Treating it as a generic Dibrugarh job
Driers, sorters and fans running continuously in humid buildings. Enclosure at the source is the reliable answer.
05 / Getting it there
What the route into Dibrugarh actually looks like
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | five days |
| Dispatch | 2 to 4 working days |
| To site | five days |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly twenty two hundred kilometres, normally five days on a dedicated truck.
Questions from Dibrugarh projects
What makes venue and restaurant acoustics different in Dibrugarh?
Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey. Driers, sorters and fans running continuously in humid buildings. Enclosure at the source is the reliable answer.
Where should the budget go first on a Dibrugarh project?
Containment. Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope. Table level comfort. Absorption at the ceiling so guests stop raising their voices at each other.
Do you have an office or installation team in Dibrugarh?
No. We manufacture in India and supply into Dibrugarh. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Dibrugarh site?
made at: Our own plant, Palwal, Haryana, reaches site in: five days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Panels on the wall as a neighbour noise solution. A lobby with both doors able to open at once.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Tell us the room, we will tell you the build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.