For projects in Dammam
Office acoustics and soundproofing in Dammam
Three separate problems get called one problem: speech carrying across an open floor, meeting rooms that leak, and hard rooms that ring. Each has a different answer and mixing them up is how budgets get wasted. Cooling runs year round at high load, so chillers, AHUs and large duct runs are constant sources. Plant room lining and duct attenuation carry most of the result.
- Open plan
- Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk.
- Meeting rooms
- Privacy between rooms. That is partition and door work, not panels.
- Cabins and calls
- Short RT so a call sounds clean. A small amount of well placed absorber.
- Quote
- From a plan and a section, within 48 hours
01 / What it is
The product, described honestly, for a Dammam brief
Three separate problems get called one problem: speech carrying across an open floor, meeting rooms that leak, and hard rooms that ring. Each has a different answer and mixing them up is how budgets get wasted.
Cooling runs year round at high load, so chillers, AHUs and large duct runs are constant sources. Plant room lining and duct attenuation carry most of the result.
Work reaching us from Dammam is mostly industrial plant and control rooms, corporate offices, compound housing, hotels, schools, clinics.
- Industrial noise is a mass problem Compressors, generators and process plant are low frequency and structure-borne. Panels on a wall will not touch it and we will say so.
- Control rooms run long shifts Operators listening to alarms and radios for twelve hours need intelligibility and a low background, not a reverberation figure.
- The port is on the doorstep Short road leg, predictable landed cost, and straightforward replacement if something arrives damaged.
- Open plan Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for office acoustics are on the main product page. This page covers what that means for a project in Dammam.
Office and conference room acoustics Acoustic office screens
02 / The build-up
How the layers stack, from the structure inwards
-
Layer 1
Ceiling baffles and clouds
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. In Dammam, cooling runs year round at high load, so chillers, AHUs and large duct runs are constant sources. Plant room lining and duct attenuation carry most of the result.
Vertical baffles. Hung on edge in rows. Both faces absorb, so coverage figures based on plan area understate them.
-
Layer 2
PET felt acoustic panels
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. In Dammam, mosques, conference halls and hotel ballrooms are tall hard volumes where intelligibility over a long reverberation tail is the whole brief.
Over a porous backing. Panel over mineral or PET backing where the room needs genuine low mid control.
-
Layer 3
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Dammam, new school and university buildings are large, hard and highly glazed. Lecture theatres and sports halls are the spaces that fail first, and ceiling absorption is the practical fix.
Wall array. Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
Architects working in Dammam usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
03 / On the ground
The Dammam conditions that change the answer
- Industrial noise is a mass problem
Compressors, generators and process plant are low frequency and structure-borne. Panels on a wall will not touch it and we will say so.
- Control rooms run long shifts
Operators listening to alarms and radios for twelve hours need intelligibility and a low background, not a reverberation figure.
- The port is on the doorstep
Short road leg, predictable landed cost, and straightforward replacement if something arrives damaged.
- Heat, dust and sealed buildings
Closed up with heavy cooling year round, so plant noise accumulates inside rather than escaping.
- Plant and HVAC
Cooling runs year round at high load, so chillers, AHUs and large duct runs are constant sources. Plant room lining and duct attenuation carry most of the result.
04 / Room by room
Space by space, for Dammam briefs
-
Open plan
Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk. Compressors, generators and process plant are low frequency and structure-borne. Panels on a wall will not touch it and we will say so.
- Ceiling baffles and clouds, 100% PET non-woven, the panel family
- PET felt acoustic panels, 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Acoustic carpet and rugs, High density polyester
-
Meeting rooms
Privacy between rooms. That is partition and door work, not panels. Operators listening to alarms and radios for twelve hours need intelligibility and a low background, not a reverberation figure.
- Ceiling baffles and clouds, 9 to 24 mm
- PET felt acoustic panels, 4 to 24 mm
- Acoustic carpet and rugs, Felt
-
Cabins and calls
Short RT so a call sounds clean. A small amount of well placed absorber. Short road leg, predictable landed cost, and straightforward replacement if something arrives damaged.
- Ceiling baffles and clouds, Made to the drawing, standard and custom
- PET felt acoustic panels, 1220 x 2440 mm standard, 4 x 8 ft
- Acoustic carpet and rugs, 64 sq ft per pack
For a Dammam interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
04 / Climate
Durability in Dammam, before acoustics is discussed
Dammam is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the material list before acoustics is discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The failure we design against here is dust ingress and thermal movement in long runs.
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
06 / Read this first
The six errors that cost the most
-
Lining every wall while leaving the ceiling bare
The ceiling is almost always the largest untreated surface, so leaving it out means paying for panels that cannot reach the target.
-
Treating a privacy problem with absorption
If the complaint is being overheard, no amount of absorption inside the room will fix it. That is a partition job and we will say so.
-
Glass cabins specified without a door and head detail
A gap undoes the partition it sits in. Sealing is the cheapest line on the quote and the first one to get cut.
-
Treating it as a generic Dammam job
Compressors, generators and process plant are low frequency and structure-borne. Panels on a wall will not touch it and we will say so.
05 / Route to site
Getting it to Dammam, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Dammam, then a short road run across the Eastern Province |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Dammam |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight direct into Dammam, then a short road run to site. Air freight for samples and urgent quantities.
Questions from Dammam projects
What makes office acoustics and soundproofing different in Dammam?
Cooling runs year round at high load, so chillers, AHUs and large duct runs are constant sources. Plant room lining and duct attenuation carry most of the result. Compressors, generators and process plant are low frequency and structure-borne. Panels on a wall will not touch it and we will say so.
Where should the budget go first on a Dammam project?
Open plan. Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk. Meeting rooms. Privacy between rooms. That is partition and door work, not panels.
Do you have an office or installation team in Dammam?
No. We manufacture in India and supply into Dammam. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Dammam site?
ships from: Palwal, Haryana, India, arrives at: Dammam, then a short road run across the Eastern Province, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Lining every wall while leaving the ceiling bare. Treating a privacy problem with absorption.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send a plan and a section, get a real build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.