Manufactured in India, supplied in Czechia
Ceiling baffles and clouds in Czechia
We manufacture ceiling baffles and clouds at our own plant at Palwal in Haryana, India, and supply them into Czechia. Made at our own plant in India and shipped into Hamburg, then rail and road inland, with container pricing that suits the way Czech projects buy.
- Material
- 100% PET non-woven, the panel family
- Thickness
- 9 to 24 mm
- Size
- Made to the drawing, standard and custom
- Exposure
- Both faces work, which is why suspended area outperforms the same area laid flat
- Test standard
- ASTM C423
- Lead time
- Confirmed against the drawing
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / Start here
What you are buying, and what it fixes in Czechia
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. It is how you treat a room with exposed services, where there is no ceiling to line.
Work reaching us from Czechia is mostly production halls, plant rooms, offices, panel block apartments, schools, clinics.
Panel block housing has concrete walls with good mass but no impact isolation, while older masonry stock has timber floors that pass footfall.
- Vertical baffles Hung on edge in rows. Both faces absorb, so coverage figures based on plan area understate them.
- Horizontal clouds Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
- Mixed with services Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
- What it will not do Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for baffles and clouds are on the main product page. This page covers what that means for a project in Czechia.
Acoustic ceiling baffles Acoustic ceiling clouds Acoustic ceiling tiles
02 / Data sheet
The published figures, unchanged by location
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- EchoCore 151500 GSM. Offices, retail, general
- EchoPro 181800 GSM. Halls, atria, spaces with a target
- EchoMax 222200 GSM. High volume and high occupancy
| Material | 100% PET non-woven, the panel family |
|---|---|
| Thickness | 9 to 24 mm |
| Size | Made to the drawing, standard and custom |
| Exposure | Both faces work, which is why suspended area outperforms the same area laid flat |
| Test standard | ASTM C423 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / What drives the brief
The Czechia conditions that change the answer
- Panel block apartments
Prefabricated concrete panel housing passes speech and footfall between flats through thin, well connected elements. Surface treatment does nothing here. Mass and a resilient break do.
- Industrial noise is a mass problem
Compressors, presses and extraction plant are low frequency and structure-borne. We will tell you when absorption is the wrong purchase rather than sell it to you.
- Value is checked properly
Czech buyers compare specifications line by line. That suits a manufacturer, because we can answer for what is actually in the product.
- Landlocked, so plan the inland leg
Hamburg then rail and road. We quote the sea leg and the inland leg separately so the programme is built on real dates.
- School and campus buildings
School buildings are hard surfaced with long corridors, and gymnasiums double as assembly halls.
If you are specifying for a Czechia project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate
Why the climate in Czechia changes the material, not the target
Czechia is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Logistics
How material reaches a Czechia site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Hamburg, then rail and road inland |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Hamburg |
| Packing | Flat packed with fixings, sets labelled by row so the install sequence matches the drawing. |
| Lead time | Confirmed against the drawing. Standard sizes 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Hamburg, then rail and road inland. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Baffles and clouds | 500 sq ft, about 46 sq m |
|---|
Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does.
06 / Straight talk
Where this goes wrong, said plainly
-
The wrong product for the problem
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Czechia
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Czechia: questions we are actually asked
Do you manufacture ceiling baffles and clouds in Czechia?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Czechia as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Hamburg, then rail and road inland, with container pricing that suits the way Czech projects buy. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Czechia job?
Prefabricated concrete panel housing passes speech and footfall between flats through thin, well connected elements. Surface treatment does nothing here. Mass and a resilient break do. Compressors, presses and extraction plant are low frequency and structure-borne. We will tell you when absorption is the wrong purchase rather than sell it to you. Those two things move the build-up far more than the panel figure does.
Is this the right material for Czechia conditions?
Czechia is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How quickly can material reach a site in Czechia?
ships from: Palwal, Haryana, India, arrives at: Hamburg, then rail and road inland, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will ceiling baffles and clouds not do?
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
What is the minimum order and how is it packed?
The same 500 sq ft minimum applies on export. Baffles and clouds, 500 sq ft, about 46 sq m. Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does. Flat packed with fixings, sets labelled by row so the install sequence matches the drawing.
Next step
Drawings in, BOQ and a delivered date out
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.