Manufactured in India, supplied in Chennai
PET felt acoustic panels in Chennai
We manufacture PET felt acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Chennai. Chennai is coastal, hot and industrial, and salt air decides which acoustic materials are still doing their job in five years.
- Material
- 100% PET non-woven, no added binder
- Thickness
- 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Custom thickness
- 4 to 24 mm
- Panel size
- 1220 x 2440 mm standard, 4 x 8 ft
- Maximum size
- 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft
- Lead time
- 4 to 7 working days for standard colours and thicknesses
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The product
What this is, and what it changes in a Chennai room
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. It absorbs mid and high frequency energy and finishes as the visible surface, so it is both the acoustic layer and the finish.
Work reaching us from Chennai is mostly IT corridor offices, automotive plants, recording and dubbing rooms, hospitals, schools, hotels.
RC frame houses and apartments with hard floors, built for heat and humidity with open plan layouts that carry sound room to room.
- Direct to wall Panel bonded or mechanically fixed flat to the substrate. Simplest, and the weakest at low frequency.
- On a 25 to 50 mm air gap The same panel on battens. The air gap moves absorption down in frequency at no extra material cost, and is the cheapest improvement available.
- Over a porous backing Panel over mineral or PET backing where the room needs genuine low mid control.
- What it will not do It absorbs. It does not block.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for PET felt panels are on the main product page. This page covers what that means for a project in Chennai.
02 / Data sheet
The numbers, and they do not move by city
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- EchoCore 151500 GSM. Offices, classrooms, general commercial
- EchoPro 181800 GSM. Studios, auditoria, rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Material | 100% PET non-woven, no added binder |
|---|---|
| Thickness | 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent |
| Custom thickness | 4 to 24 mm |
| Panel size | 1220 x 2440 mm standard, 4 x 8 ft |
| Maximum size | 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft |
| Density range | 1200 to 3600 GSM |
| NRC | 0.30 at 9 mm, rising with thickness and air gap |
| Test standard | ASTM C423 |
On a Chennai job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What the buildings in Chennai do to the specification
- Salt air and humidity
PET felt does not absorb moisture, rot or feed mould. On a coastal site that is the difference between a ceiling that lasts and one that sags in two monsoons.
- Sealed against the heat
Rooms stay closed and conditioned for most of the year, so sound builds up inside instead of leaking away.
- Automotive plants
Presses, conveyors and test rooms where the answer is enclosure and mass rather than absorption on a far wall.
- Dubbing and recording rooms
A long established film sound industry, mostly in rooms inside occupied buildings. Isolation first, tuning second.
- School and campus buildings
Very large school and college campuses in concrete and tile, with auditoria and seminar halls used constantly.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate and durability
Why the climate in Chennai changes the material, not the target
Chennai is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Getting it there
Supply into Chennai, start to site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | five days |
| Dispatch | 2 to 4 working days |
| To site | five days |
| Packing | Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote. |
| Lead time | 4 to 7 working days for standard colours and thicknesses. Grooved and custom colours take longer, and we say so before you order. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly twenty two hundred kilometres, normally five days on a dedicated truck.
From 10 panels for 9 mm EchoCore 15. Other grades and thicknesses carry their own minimum.
| 9 mm EchoCore 15, 1500 GSM | 10 panels, 320 sq ft |
|---|---|
| 9 mm EchoPro 18, 1800 GSM | 50 panels, 1,600 sq ft |
| 9 mm EchoMax 22, 2200 GSM | 100 panels, 3,200 sq ft |
| 12 mm, 2400 GSM | 30 panels, 960 sq ft |
| 18 mm, 3000 GSM | 50 panels, 1,600 sq ft |
| 24 mm, 3600 GSM | 50 panels, 1,600 sq ft |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Before you buy
The things worth knowing before you place the order
-
The wrong product for the problem
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
A claim of being local to Chennai
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Chennai: questions we are actually asked
Where are the PET felt acoustic panels you supply to Chennai actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Chennai as the manufacturer rather than through a dealer. Chennai is coastal, hot and industrial, and salt air decides which acoustic materials are still doing their job in five years. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Chennai project?
PET felt does not absorb moisture, rot or feed mould. On a coastal site that is the difference between a ceiling that lasts and one that sags in two monsoons. Presses, conveyors and test rooms where the answer is enclosure and mass rather than absorption on a far wall. Those two things move the build-up far more than the panel figure does.
Will this material last in the Chennai climate?
Chennai is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How does an order actually travel to Chennai?
made at: Our own plant, Palwal, Haryana, reaches site in: five days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will PET felt acoustic panels not do?
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
How is the order packed and what is the minimum?
From 10 panels for 9 mm EchoCore 15. Other grades and thicknesses carry their own minimum. 9 mm EchoCore 15, 1500 GSM, 10 panels, 320 sq ft. 9 mm EchoPro 18, 1800 GSM, 50 panels, 1,600 sq ft. 9 mm EchoMax 22, 2200 GSM, 100 panels, 3,200 sq ft. 12 mm, 2400 GSM, 30 panels, 960 sq ft. 18 mm, 3000 GSM, 50 panels, 1,600 sq ft. 24 mm, 3600 GSM, 50 panels, 1,600 sq ft. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote.
Next step
Send the drawings, get a straight answer
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.