Manufactured in India, supplied in Bulgaria
Acoustic panels in Bulgaria
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Bulgaria. Made at our own plant in India and shipped into Varna or Burgas on the Black Sea, then road inland.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / Start here
What this is, and what it changes in a Bulgaria room
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Bulgaria is mostly coastal and ski resorts, offices and service centres, panel block housing, schools, hospitals.
Panel block housing and newer concrete construction, both with hard floors and slabs that pass impact noise.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Bulgaria.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification
The numbers, and they do not move by city
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
On a Bulgaria job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What we see driving Bulgaria briefs
- Two seasons, two deadlines
Coastal work finishes before summer and mountain work before winter. Real dates matter more than a marginally better price.
- Panel block housing
Prefabricated concrete blocks pass speech and footfall between flats through thin, well connected elements. Surface treatment does nothing.
- Service centre floors
Large rooms full of people on calls, where speech privacy rather than echo is the actual problem.
- Black Sea ports, then road
Varna and Burgas both serve the country well. We quote the sea leg and the inland leg separately.
- School and campus buildings
School buildings are hard surfaced with long corridors and gymnasiums serving as halls.
- The studio and content scene
A small but growing production sector working inside existing buildings with good mass.
For a Bulgaria practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate and durability
What the Bulgaria climate rules in and rules out
Bulgaria is cold winters and warm summers, with a wide annual temperature range, and that narrows the sensible material list before acoustics is even discussed.
A wide annual swing stresses adhesive fixings and moves timber. Mechanical fixing beats adhesive alone, and PET felt is stable across the range.
The risk we design against here is adhesive failure and timber movement across the annual swing.
For a Bulgaria interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Logistics
What the route into Bulgaria actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Varna or Burgas, then road inland |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Varna or Burgas |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Varna or Burgas, then road inland. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Before you buy
The things worth knowing before you place the order
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Local approvals that nobody actually holds
We hold no Bulgaria certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
How it looks once it is installed
Bulgaria: questions we are actually asked
Do you manufacture acoustic panels in Bulgaria?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Bulgaria as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Varna or Burgas on the Black Sea, then road inland. You buy at factory prices with one consistent batch across the order.
Why would a Bulgaria build-up differ from anywhere else?
Coastal work finishes before summer and mountain work before winter. Real dates matter more than a marginally better price. Prefabricated concrete blocks pass speech and footfall between flats through thin, well connected elements. Surface treatment does nothing. Those two things move the build-up far more than the panel figure does.
Is this the right material for Bulgaria conditions?
Bulgaria is cold winters and warm summers, with a wide annual temperature range. A wide annual swing stresses adhesive fixings and moves timber. Mechanical fixing beats adhesive alone, and PET felt is stable across the range. The failure we design against here is adhesive failure and timber movement across the annual swing.
How quickly can material reach a site in Bulgaria?
ships from: Palwal, Haryana, India, arrives at: Varna or Burgas, then road inland, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy acoustic panels for?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
How is the order packed and what is the minimum?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.