Manufactured in India, supplied in Boston
Ceiling baffles and clouds in Boston
We manufacture ceiling baffles and clouds at our own plant at Palwal in Haryana, India, and supply them into Boston. Made at our own plant in India and shipped into Boston or a nearby East Coast port, then road to site, with the full transit window quoted openly.
- Material
- 100% PET non-woven, the panel family
- Thickness
- 9 to 24 mm
- Size
- Made to the drawing, standard and custom
- Exposure
- Both faces work, which is why suspended area outperforms the same area laid flat
- Test standard
- ASTM C423
- Lead time
- Confirmed against the drawing
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / The material
What this is, and what it changes in a Boston room
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. It is how you treat a room with exposed services, where there is no ceiling to line.
Work reaching us from Boston is mostly universities and labs, teaching hospitals, offices, triple-decker housing, studios, schools.
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
- Vertical baffles Hung on edge in rows. Both faces absorb, so coverage figures based on plan area understate them.
- Horizontal clouds Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
- Mixed with services Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
- What it will not do Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for baffles and clouds are on the main product page. This page covers what that means for a project in Boston.
Acoustic ceiling baffles Acoustic ceiling clouds Acoustic ceiling tiles
02 / Data sheet
The published figures, unchanged by location
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- EchoCore 151500 GSM. Offices, retail, general
- EchoPro 181800 GSM. Halls, atria, spaces with a target
- EchoMax 222200 GSM. High volume and high occupancy
| Material | 100% PET non-woven, the panel family |
|---|---|
| Thickness | 9 to 24 mm |
| Size | Made to the drawing, standard and custom |
| Exposure | Both faces work, which is why suspended area outperforms the same area laid flat |
| Test standard | ASTM C423 |
On a Boston job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What we see driving Boston briefs
- Institutions specify properly
University and hospital work arrives with a consultant and a written target. Send us the specification and we will say where our material sits against it, in writing.
- Labs and equipment rooms
Fume hoods, chillers and equipment run constantly next to rooms where people have to concentrate. That is a plant isolation problem before it is a room treatment problem.
- Old brick and triple-deckers
Boston housing stock is old, wooden inside and stacked. Floors between units pass footfall easily, and a resilient layer under the finish is what fixes it.
- Sealed against hard winters
Buildings close up for months and mechanical systems run hard. Noise stops escaping and starts accumulating inside.
- School and campus buildings
Public school buildings run long corridors with hard floors and lay-in tile ceilings that were chosen for cost, not for speech. Classroom reverberation and corridor spill are the two complaints, and both respond to ceiling area rather than wall panels.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Durability
Why the climate in Boston changes the material, not the target
Boston is mild summers and cold, wet winters, and that narrows the sensible material list before acoustics is even discussed.
Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air.
The risk we design against here is condensation and cold bridging behind new linings.
For a Boston interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Route to site
What the route into Boston actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Boston or a nearby East Coast port, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea into the East Coast |
| Packing | Flat packed with fixings, sets labelled by row so the install sequence matches the drawing. |
| Lead time | Confirmed against the drawing. Standard sizes 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Boston or a nearby East Coast port, then road to site. Air freight for samples, approvals and urgent quantities.
The same 500 sq ft minimum applies on export.
| Baffles and clouds | 500 sq ft, about 46 sq m |
|---|
Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does.
06 / Read this first
Where this goes wrong, said plainly
-
The wrong product for the problem
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a Boston presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Boston: questions we are actually asked
Is there a Boston factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Boston as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Boston or a nearby East Coast port, then road to site, with the full transit window quoted openly. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Boston project?
University and hospital work arrives with a consultant and a written target. Send us the specification and we will say where our material sits against it, in writing. Fume hoods, chillers and equipment run constantly next to rooms where people have to concentrate. That is a plant isolation problem before it is a room treatment problem. Those two things move the build-up far more than the panel figure does.
Does Boston weather shorten the life of this material?
Boston is mild summers and cold, wet winters. Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air. The failure we design against here is condensation and cold bridging behind new linings.
How quickly can material reach a site in Boston?
ships from: Palwal, Haryana, India, arrives at: Boston or a nearby East Coast port, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What should you not buy ceiling baffles and clouds for?
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Is there a minimum order, and how does it arrive?
The same 500 sq ft minimum applies on export. Baffles and clouds, 500 sq ft, about 46 sq m. Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does. Flat packed with fixings, sets labelled by row so the install sequence matches the drawing.
Next step
Tell us the room, we will tell you the build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.