Manufactured in India, supplied in Bhutan
Acoustic panels in Bhutan
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Bhutan. Made at our own plant in India and moved overland through Phuentsholing, so Bhutan is one of the few markets we reach entirely by road with no port at all.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The material
What you are buying, and what it fixes in Bhutan
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Bhutan is mostly hotels and resorts, institutional buildings, assembly halls, schools, clinics, offices.
Concrete frame with block infill and traditional timber detailing, with hard floors and cold external walls.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Bhutan.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification
The published figures, unchanged by location
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
On a Bhutan job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What decides the build-up in Bhutan
- Hospitality at altitude
Hotels and lodges where guest room isolation matters more than anything happening inside the room itself.
- No port, no container handling
Entirely by road from our plant. Lead times are short and a small consignment is genuinely economic.
- Traditional construction
Timber framing, rammed earth and masonry in buildings that must keep their character. Work has to be internal and respectful of the fabric.
- Seismic and mountainous
Structures are built to move and the final road leg is steep and rough. We brace and wrap for both.
- School and campus buildings
School buildings are hard surfaced with high ceilings, and halls carry assembly and performance.
- The studio and content scene
A very small broadcast and music sector working in rooms inside existing buildings.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Conditions
Durability in Bhutan, before acoustics is discussed
Bhutan is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Route to site
Supply into Bhutan, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Overland through Phuentsholing, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Road via the India border |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Overland by road through the India border, then on to site. No sea leg and no port handling.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Worth knowing
The things worth knowing before you place the order
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Bhutan certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
How it looks once it is installed
Bhutan: questions we are actually asked
Do you manufacture acoustic panels in Bhutan?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Bhutan as the manufacturer rather than through a dealer. Made at our own plant in India and moved overland through Phuentsholing, so Bhutan is one of the few markets we reach entirely by road with no port at all. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Bhutan job?
Entirely by road from our plant. Lead times are short and a small consignment is genuinely economic. Timber framing, rammed earth and masonry in buildings that must keep their character. Work has to be internal and respectful of the fabric. Those two things move the build-up far more than the panel figure does.
Will this material last in the Bhutan climate?
Bhutan is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
When would material land on a Bhutan site?
ships from: Palwal, Haryana, India, arrives at: Overland through Phuentsholing, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do acoustic panels fail to help?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
What is the minimum order and how is it packed?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Send the drawings, get a straight answer
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.