Home > Bhubaneswar > SoundBlanket mass loaded vinyl
Manufactured in India, supplied in Bhubaneswar
SoundBlanket mass loaded vinyl in Bhubaneswar
We manufacture soundBlanket mass loaded vinyl at our own plant at Palwal in Haryana, India, and supply them into Bhubaneswar. Bhubaneswar is a planned institutional city near a cyclone coast, so the buildings are new and the climate is hard on the wrong material.
- Density
- 2100 kg per cubic metre
- 2.5 mm
- STC 30, 5.25 kg per sq m
- 4 mm
- STC 34, 8.4 kg per sq m
- 6 mm
- 12.6 kg per sq m, STC on request
- Roll size
- 5 x 1.2 m, 6 sq m per roll
- Lead time
- 4 to 7 working days
- Minimum order
- From 10 rolls
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / What it is
The material, and what it actually does on a Bhubaneswar job
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. It is the barrier product, not an absorber, and it is the right answer when the problem is noise passing through a structure.
Work reaching us from Bhubaneswar is mostly IT and institutional campuses, hospitals, colleges, auditoriums, hotels, offices.
RC frame apartments and houses with hard floors, built for heat and heavy monsoon along a cyclone exposed coast.
- Wall, decoupled Independent stud, membrane between the boards, cavity absorption, two boards. The membrane is one part of a system, never the whole answer.
- Floor, floating Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
- Duct and plant wrap Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
- What it will not do Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for SoundBlanket MLV are on the main product page. This page covers what that means for a project in Bhubaneswar.
02 / Specification
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- 2.5 mmSTC 30, 5.25 kg per sq m. Ducts, light partitions, retrofit where depth is tight
- 4 mmSTC 34, 8.4 kg per sq m. Party walls, floors, plant rooms, the common specification
- 6 mm12.6 kg per sq m. Machine enclosures and low frequency problems
| Density | 2100 kg per cubic metre |
|---|---|
| 2.5 mm | STC 30, 5.25 kg per sq m |
| 4 mm | STC 34, 8.4 kg per sq m |
| 6 mm | 12.6 kg per sq m, STC on request |
| Roll size | 5 x 1.2 m, 6 sq m per roll |
| Form | Limp sheet, cuts with a knife, seams lapped and sealed |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / In this market
What the buildings in Bhubaneswar do to the specification
- Coastal humidity and cyclones
PET felt does not absorb moisture, rot or feed mould, which matters where mineral products sag within a couple of seasons.
- New campuses at scale
The same classroom or office detail repeated across many blocks. Consistency across the order is where the value is.
- Teaching and assembly rooms
Large halls in concrete and tile that defeat the speaker long before anyone calls the room echoey.
- Three to four days by road
A dedicated truck from Palwal, confirmed before dispatch, with samples sent ahead.
- The housing stock
RC frame apartments and houses with hard floors, built for heat and heavy monsoon along a cyclone exposed coast.
- The studio and content scene
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
If you are specifying for a Bhubaneswar project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate and durability
What the Bhubaneswar climate rules in and rules out
Bhubaneswar is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Getting it there
Supply into Bhubaneswar, start to site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | three to four days |
| Dispatch | 2 to 4 working days |
| To site | three to four days |
| Packing | Rolls on core tubes, wrapped and end capped, 5 x 1.2 m. Weights on the packing list, because a full roll is heavy and site access matters. |
| Lead time | 4 to 7 working days. Full container quantities scheduled against the vessel. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly fifteen hundred kilometres, normally three to four days on a dedicated truck.
10 rolls for 2.5 mm and 4 mm. Other thicknesses are made to order at 10 tonnes per thickness.
| 2.5 mm | 10 rolls, 60 sq m, about 315 kg |
|---|---|
| 4 mm | 10 rolls, 60 sq m, about 504 kg |
| 6 mm and other thicknesses | 10 tonnes per thickness |
A SoundBlanket roll is 5 x 1.2 m, which is 6 sq m. At 2100 kg per cubic metre a roll weighs about 31.5 kg at 2.5 mm and about 50.4 kg at 4 mm, so a 10 roll minimum is 60 sq m and roughly 315 kg at 2.5 mm or 504 kg at 4 mm.
06 / Straight talk
The things worth knowing before you place the order
-
The wrong product for the problem
Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Suppliers who imply a Bhubaneswar presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Bhubaneswar: questions we are actually asked
Do you manufacture soundBlanket mass loaded vinyl in Bhubaneswar?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Bhubaneswar as the manufacturer rather than through a dealer. Bhubaneswar is a planned institutional city near a cyclone coast, so the buildings are new and the climate is hard on the wrong material. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Bhubaneswar enquiry?
The same classroom or office detail repeated across many blocks. Consistency across the order is where the value is. PET felt does not absorb moisture, rot or feed mould, which matters where mineral products sag within a couple of seasons. Those two things move the build-up far more than the panel figure does.
Does Bhubaneswar weather shorten the life of this material?
Bhubaneswar is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How quickly can material reach a site in Bhubaneswar?
made at: Our own plant, Palwal, Haryana, reaches site in: three to four days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are soundBlanket mass loaded vinyl the wrong purchase?
Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
What quantity do we have to order, and in what packaging?
10 rolls for 2.5 mm and 4 mm. Other thicknesses are made to order at 10 tonnes per thickness. 2.5 mm, 10 rolls, 60 sq m, about 315 kg. 4 mm, 10 rolls, 60 sq m, about 504 kg. 6 mm and other thicknesses, 10 tonnes per thickness. A SoundBlanket roll is 5 x 1.2 m, which is 6 sq m. At 2100 kg per cubic metre a roll weighs about 31.5 kg at 2.5 mm and about 50.4 kg at 4 mm, so a 10 roll minimum is 60 sq m and roughly 315 kg at 2.5 mm or 504 kg at 4 mm. Rolls on core tubes, wrapped and end capped, 5 x 1.2 m. Weights on the packing list, because a full roll is heavy and site access matters.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.