Home > Bhopal > Acoustic carpet and rugs

Acoustic carpet tiles and rugs on a modern floor

Manufactured in India, supplied in Bhopal

Acoustic carpet and rugs in Bhopal

We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Bhopal. Bhopal is government, education and healthcare, which means a steady stream of large rooms where a lot of people need to hear one voice.

Tile size
500 x 500 mm
Thickness
4 mm
Face
High density polyester
Backing
Felt
Pack coverage
64 sq ft per pack
Lead time
4 to 7 working days
Minimum order
From 320 sq ft
  • Made at our own plant, Palwal, Haryana, India
  • One batch across the order, no blending between runs
  • Test reports sent on request, not just quoted

This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.

01 / What it is

The material, and what it actually does on a Bhopal job

A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.

Work reaching us from Bhopal is mostly government and institutional buildings, colleges, hospitals, auditoriums, offices, hotels.

RC frame apartments and independent houses with stone and tile floors, in a dry climate with dusty summers.

  • Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
  • Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
  • Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
  • What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

Full specification

Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Bhopal.

Acoustic carpets and rugs

02 / Specification sheet

One specification sheet, the same in every market

Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.

  • Standard tile4 mm. Offices, classrooms, studios, corridors
Acoustic carpet and rugs: published specification
Tile size500 x 500 mm
Thickness4 mm
FaceHigh density polyester
BackingFelt
Pack coverage64 sq ft per pack
Boxed20 kg, 55 x 55 x 15 cm

On a Bhopal job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.

03 / In this market

What the buildings in Bhopal do to the specification

  • Lakes and humidity

    PET felt does not hold moisture or feed mould, which matters through a humid season in a sealed room.

  • Rooms built for listening

    Assembly halls and lecture theatres in hard finishes defeat the speaker long before anyone calls the room echoey.

  • New institutional build

    Concrete and tile put up quickly, with the acoustic problem discovered at handover rather than designed out.

  • Medical privacy

    Consult and counselling rooms where conversations have to stay in the room. Partition and door before panel.

  • Assembly and performance rooms

    Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.

  • The housing stock

    RC frame apartments and independent houses with stone and tile floors, in a dry climate with dusty summers.

We would rather argue about the build-up at design stage than on site. See how we support architects.

04 / Durability

What the Bhopal climate rules in and rules out

Bhopal is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.

PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.

The risk we design against here is wet-season humidity behind linings.

If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.

05 / Route to site

Supply into Bhopal, start to site

Supply into Bhopal
Made atOur own plant, Palwal, Haryana
Reaches site intwo days
Dispatch2 to 4 working days
To sitetwo days
PackingBoxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Lead time4 to 7 working days.

Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.

By road from Palwal, roughly seven hundred kilometres, normally two days on a dedicated truck.

320 sq ft for carpet tiles, 500 sq ft for rugs.

Minimum order, acoustic carpet and rugs
Carpet tiles320 sq ft, about 30 sq m, 5 packs
Rugs500 sq ft, about 46 sq m

A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.

06 / Worth knowing

Four honest warnings before you buy

  • The wrong product for the problem

    Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

  • Square footage quoted before the room is understood

    Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.

  • A claim of being local to Bhopal

    We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.

FAQ

Bhopal: questions we are actually asked

Are these acoustic carpet and rugs made in Bhopal?

No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Bhopal as the manufacturer rather than through a dealer. Bhopal is government, education and healthcare, which means a steady stream of large rooms where a lot of people need to hear one voice. You buy at factory prices with one consistent batch across the order.

What do you look at first on a Bhopal enquiry?

Assembly halls and lecture theatres in hard finishes defeat the speaker long before anyone calls the room echoey. Concrete and tile put up quickly, with the acoustic problem discovered at handover rather than designed out. Those two things move the build-up far more than the panel figure does.

Will this material last in the Bhopal climate?

Bhopal is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.

What is the delivery time into Bhopal?

made at: Our own plant, Palwal, Haryana, reaches site in: two days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.

What should you not buy acoustic carpet and rugs for?

Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

How is the order packed and what is the minimum?

320 sq ft for carpet tiles, 500 sq ft for rugs. Carpet tiles, 320 sq ft, about 30 sq m, 5 packs. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.

Next step

Tell us the room, we will tell you the build-up

A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.