Manufactured in India, supplied in Berlin
Soundproofing materials in Berlin
We manufacture soundproofing materials at our own plant at Palwal in Haryana, India, and supply them into Berlin. Made at our own plant in India, packed for container transit, specified against your drawings before anything ships.
- SoundBlanket MLV
- 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6
- BassBloc
- 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85
- Principle
- Mass, then decoupling, then cavity absorption, then sealing
- Test standards
- ASTM E90 for the barrier, ASTM C423 for the absorber
- Lead time
- 4 to 7 working days for stock items
- ASTM E90 for the barrier, ASTM C423 for the absorber
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / What it is
The product, described honestly, for a Berlin brief
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. This is the page for someone whose problem is noise getting through, not a room that sounds wrong.
Work reaching us from Berlin is mostly altbau flats, studios, clubs, startup offices, schools, clinics.
Altbau blocks have solid masonry walls and timber joist floors, so airborne noise is controlled but footfall is not. Neubau is concrete with better floors and much harder surfaces.
- Independent leaf A second wall that does not touch the first. Nothing else comes close for the money.
- Resilient bar Where a full independent leaf will not fit. Effective, and very easy to short circuit with one wrong screw.
- Floating floor Resilient layer and deck, to break impact energy before it reaches the structure.
- What it will not do Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our soundproofing materials are on the main product page. This page covers what that means for a project in Berlin.
SoundBlanket mass loaded vinyl BassBloc sound absorber Wall soundproofing systems
02 / The numbers
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Light retrofit2.5 mm membrane. Where depth is not available
- Standard partition4 mm membrane on an independent leaf. The common specification
- Heavy6 mm membrane and full decoupling. Plant, machine enclosure, low frequency
| SoundBlanket MLV | 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6 |
|---|---|
| BassBloc | 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85 |
| Principle | Mass, then decoupling, then cavity absorption, then sealing |
| Test standards | ASTM E90 for the barrier, ASTM C423 for the absorber |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
What decides the build-up in Berlin
- Altbau floors
Timber joists with fill between them pass footfall and speech. Adding mass and a resilient layer works better than anything fixed to the ceiling underneath.
- Club and live venues
Berlin nightlife runs long hours beside housing. Low frequency containment is the whole job, and it is structural, not decorative.
- Courtyard buildings
Hinterhof layouts bounce plant noise and voices between facing windows, which turns one noisy unit into a block wide problem.
- Cold winters, sealed rooms
Tight, well insulated rooms sound dead in the wrong way. Balanced absorption matters as much as isolation.
- Plant and HVAC
Mechanical ventilation with heat recovery is standard in newer stock, so duct-borne noise and terminal unit noise are the sources rather than open windows.
- The housing stock
Altbau blocks have solid masonry walls and timber joist floors, so airborne noise is controlled but footfall is not. Neubau is concrete with better floors and much harder surfaces.
If you are specifying for a Berlin project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate and durability
What the Berlin climate rules in and rules out
Berlin is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Route to site
Supply into Berlin, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Hamburg or Bremerhaven |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Hamburg |
| Packing | Rolls on core tubes, boards palletised, fixings and tapes listed on the same packing list. |
| Lead time | 4 to 7 working days for stock items. |
Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we say so before you order.
Sea freight into Hamburg or Bremerhaven, then road to Berlin. Air freight for samples and urgent quantities.
06 / Before you buy
The things worth knowing before you place the order
-
The wrong product for the problem
Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall. We would rather spend the conversation on the detail than on the product.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Berlin
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
How it looks once it is installed
Berlin: questions we are actually asked
Are these soundproofing materials made in Berlin?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Berlin as the manufacturer rather than through a dealer. Made at our own plant in India, packed for container transit, specified against your drawings before anything ships. You buy at factory prices with one consistent batch across the order.
Why would a Berlin build-up differ from anywhere else?
Timber joists with fill between them pass footfall and speech. Adding mass and a resilient layer works better than anything fixed to the ceiling underneath. Berlin nightlife runs long hours beside housing. Low frequency containment is the whole job, and it is structural, not decorative. Those two things move the build-up far more than the panel figure does.
Will this material last in the Berlin climate?
Berlin is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
When would material land on a Berlin site?
ships from: Palwal, Haryana, India, arrives at: Hamburg or Bremerhaven, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved and custom colours take longer, and we say so before you order.
When are soundproofing materials the wrong purchase?
Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall. We would rather spend the conversation on the detail than on the product.
What quantity do we have to order, and in what packaging?
Minimum order is confirmed with the quote. Rolls on core tubes, boards palletised, fixings and tapes listed on the same packing list.
Next step
Send the drawings, get a straight answer
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.