Manufactured in India, supplied in Bengaluru
Acoustic panels in Bengaluru
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Bengaluru. Bengaluru runs on large open floors full of people talking.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / The material
What this is, and what it changes in a Bengaluru room
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Bengaluru is mostly tech campuses, apartment towers, microbreweries and restaurants, clinics, schools, studios.
RC frame apartments and independent houses with tile and stone floors, in dense neighbourhoods where buildings sit a few feet apart.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Bengaluru.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification sheet
One specification sheet, the same in every market
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
On a Bengaluru job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / Local conditions
What the buildings in Bengaluru do to the specification
- Microbreweries and hard rooms
Exposed brick, steel and glass by design, then packed at capacity. The ceiling plane is usually the only surface left to work with.
- Floors full of simultaneous calls
Hundreds of people on video calls in one room is the defining Bengaluru brief. Absorption alone will not deliver privacy. Ceiling, screens and layout have to work together.
- Campus scale repetition
The same detail across many floors and buildings. Consistency across a large order matters more than the headline figure on one sheet.
- Mild climate, sealed buildings
Air conditioned floors stay closed, so sound accumulates rather than escaping. Absorption has to be balanced, not maximised.
- School and campus buildings
Large engineering and school campuses with lecture halls, seminar rooms and hostels repeating the same detail across many blocks.
- The studio and content scene
A large content, gaming and post production sector fitting rooms into office floors and independent houses.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate and durability
Durability in Bengaluru, before acoustics is discussed
Bengaluru is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Getting it there
How material reaches a Bengaluru site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | four to five days |
| Dispatch | 2 to 4 working days |
| To site | four to five days |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly twenty one hundred kilometres, normally four to five days on a dedicated truck.
From 10 panels for 9 mm EchoCore 15. Other grades and thicknesses carry their own minimum.
| 9 mm EchoCore 15, 1500 GSM | 10 panels, 320 sq ft |
|---|---|
| 9 mm EchoPro 18, 1800 GSM | 50 panels, 1,600 sq ft |
| 9 mm EchoMax 22, 2200 GSM | 100 panels, 3,200 sq ft |
| 12 mm, 2400 GSM | 30 panels, 960 sq ft |
| 18 mm, 3000 GSM | 50 panels, 1,600 sq ft |
| 24 mm, 3600 GSM | 50 panels, 1,600 sq ft |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Straight talk
The things worth knowing before you place the order
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Bengaluru certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
How it looks once it is installed
Bengaluru: questions we are actually asked
Where are the acoustic panels you supply to Bengaluru actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Bengaluru as the manufacturer rather than through a dealer. Bengaluru runs on large open floors full of people talking. You buy at factory prices with one consistent batch across the order.
Why would a Bengaluru build-up differ from anywhere else?
Hundreds of people on video calls in one room is the defining Bengaluru brief. Absorption alone will not deliver privacy. Ceiling, screens and layout have to work together. The same detail across many floors and buildings. Consistency across a large order matters more than the headline figure on one sheet. Those two things move the build-up far more than the panel figure does.
Is this the right material for Bengaluru conditions?
Bengaluru is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How does an order actually travel to Bengaluru?
made at: Our own plant, Palwal, Haryana, reaches site in: four to five days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are acoustic panels the wrong purchase?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
Is there a minimum order, and how does it arrive?
From 10 panels for 9 mm EchoCore 15. Other grades and thicknesses carry their own minimum. 9 mm EchoCore 15, 1500 GSM, 10 panels, 320 sq ft. 9 mm EchoPro 18, 1800 GSM, 50 panels, 1,600 sq ft. 9 mm EchoMax 22, 2200 GSM, 100 panels, 3,200 sq ft. 12 mm, 2400 GSM, 30 panels, 960 sq ft. 18 mm, 3000 GSM, 50 panels, 1,600 sq ft. 24 mm, 3600 GSM, 50 panels, 1,600 sq ft. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Tell us the room, we will tell you the build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.