Manufactured in India, supplied in Bengaluru
Acoustic carpet and rugs in Bengaluru
We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Bengaluru. Bengaluru runs on large open floors full of people talking.
- Tile size
- 500 x 500 mm
- Thickness
- 4 mm
- Face
- High density polyester
- Backing
- Felt
- Pack coverage
- 64 sq ft per pack
- Lead time
- 4 to 7 working days
- Minimum order
- From 320 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / The material
What this is, and what it changes in a Bengaluru room
A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.
Work reaching us from Bengaluru is mostly tech campuses, apartment towers, microbreweries and restaurants, clinics, schools, studios.
RC frame apartments and independent houses with tile and stone floors, in dense neighbourhoods where buildings sit a few feet apart.
- Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
- Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
- Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
- What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Bengaluru.
02 / Specification sheet
One specification sheet, the same in every market
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Standard tile4 mm. Offices, classrooms, studios, corridors
| Tile size | 500 x 500 mm |
|---|---|
| Thickness | 4 mm |
| Face | High density polyester |
| Backing | Felt |
| Pack coverage | 64 sq ft per pack |
| Boxed | 20 kg, 55 x 55 x 15 cm |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / In this market
What decides the build-up in Bengaluru
- Microbreweries and hard rooms
Exposed brick, steel and glass by design, then packed at capacity. The ceiling plane is usually the only surface left to work with.
- Floors full of simultaneous calls
Hundreds of people on video calls in one room is the defining Bengaluru brief. Absorption alone will not deliver privacy. Ceiling, screens and layout have to work together.
- Campus scale repetition
The same detail across many floors and buildings. Consistency across a large order matters more than the headline figure on one sheet.
- Mild climate, sealed buildings
Air conditioned floors stay closed, so sound accumulates rather than escaping. Absorption has to be balanced, not maximised.
- Assembly and performance rooms
Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
- The housing stock
RC frame apartments and independent houses with tile and stone floors, in dense neighbourhoods where buildings sit a few feet apart.
For a Bengaluru practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Conditions
Why the climate in Bengaluru changes the material, not the target
Bengaluru is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Route to site
Supply into Bengaluru, start to site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | four to five days |
| Dispatch | 2 to 4 working days |
| To site | four to five days |
| Packing | Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly twenty one hundred kilometres, normally four to five days on a dedicated truck.
320 sq ft for carpet tiles, 500 sq ft for rugs.
| Carpet tiles | 320 sq ft, about 30 sq m, 5 packs |
|---|---|
| Rugs | 500 sq ft, about 46 sq m |
A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.
06 / Worth knowing
What we will tell you that a reseller will not
-
The wrong product for the problem
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Bengaluru
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Bengaluru: questions we are actually asked
Are these acoustic carpet and rugs made in Bengaluru?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Bengaluru as the manufacturer rather than through a dealer. Bengaluru runs on large open floors full of people talking. You buy at factory prices with one consistent batch across the order.
Why would a Bengaluru build-up differ from anywhere else?
Hundreds of people on video calls in one room is the defining Bengaluru brief. Absorption alone will not deliver privacy. Ceiling, screens and layout have to work together. The same detail across many floors and buildings. Consistency across a large order matters more than the headline figure on one sheet. Those two things move the build-up far more than the panel figure does.
Is this the right material for Bengaluru conditions?
Bengaluru is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
When would material land on a Bengaluru site?
made at: Our own plant, Palwal, Haryana, reaches site in: four to five days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy acoustic carpet and rugs for?
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Is there a minimum order, and how does it arrive?
320 sq ft for carpet tiles, 500 sq ft for rugs. Carpet tiles, 320 sq ft, about 30 sq m, 5 packs. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Next step
Send the drawings, get a straight answer
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.