Manufactured in India, supplied in Bareilly
SoundBlanket mass loaded vinyl in Bareilly
We manufacture soundBlanket mass loaded vinyl at our own plant at Palwal in Haryana, India, and supply them into Bareilly. Bareilly works timber and furniture alongside a growing institutional sector, so workshops and lecture halls come from the same district.
- Density
- 2100 kg per cubic metre
- 2.5 mm
- STC 30, 5.25 kg per sq m
- 4 mm
- STC 34, 8.4 kg per sq m
- 6 mm
- 12.6 kg per sq m, STC on request
- Roll size
- 5 x 1.2 m, 6 sq m per roll
- Lead time
- 4 to 7 working days
- Minimum order
- From 10 rolls
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The material
What this is, and what it changes in a Bareilly room
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. It is the barrier product, not an absorber, and it is the right answer when the problem is noise passing through a structure.
Work reaching us from Bareilly is mostly furniture and timber units, colleges, hospitals, offices, auditoriums, banquet halls.
Independent houses and builder flats in brick and RC frame, often built floor by floor for different households, so the slab between them was never detailed as a separation.
- Wall, decoupled Independent stud, membrane between the boards, cavity absorption, two boards. The membrane is one part of a system, never the whole answer.
- Floor, floating Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
- Duct and plant wrap Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
- What it will not do Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for SoundBlanket MLV are on the main product page. This page covers what that means for a project in Bareilly.
02 / Specification
The published figures, unchanged by location
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- 2.5 mmSTC 30, 5.25 kg per sq m. Ducts, light partitions, retrofit where depth is tight
- 4 mmSTC 34, 8.4 kg per sq m. Party walls, floors, plant rooms, the common specification
- 6 mm12.6 kg per sq m. Machine enclosures and low frequency problems
| Density | 2100 kg per cubic metre |
|---|---|
| 2.5 mm | STC 30, 5.25 kg per sq m |
| 4 mm | STC 34, 8.4 kg per sq m |
| 6 mm | 12.6 kg per sq m, STC on request |
| Roll size | 5 x 1.2 m, 6 sq m per roll |
| Form | Limp sheet, cuts with a knife, seams lapped and sealed |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / On the ground
What we see driving Bareilly briefs
- Saws and sanders
High frequency, high level and continuous. Enclosure at the machine changes the exposure, and treating the hall does not.
- New institutional buildings
Concrete and tile put up quickly, with acoustics discovered at handover rather than designed out.
- Dust and workshop conditions
PET felt does not shed fibre or hold dust the way soft mineral products do, which matters in a woodworking environment.
- One to two days by road
A dedicated truck from Palwal, with samples ahead of the order.
- The housing stock
Independent houses and builder flats in brick and RC frame, often built floor by floor for different households, so the slab between them was never detailed as a separation.
- The studio and content scene
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
If you are specifying for a Bareilly project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate and durability
Why the climate in Bareilly changes the material, not the target
Bareilly is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Logistics
What the route into Bareilly actually looks like
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | one to two days |
| Dispatch | 2 to 4 working days |
| To site | one to two days |
| Packing | Rolls on core tubes, wrapped and end capped, 5 x 1.2 m. Weights on the packing list, because a full roll is heavy and site access matters. |
| Lead time | 4 to 7 working days. Full container quantities scheduled against the vessel. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly three hundred and fifty kilometres, normally one to two days on a dedicated truck.
10 rolls for 2.5 mm and 4 mm. Other thicknesses are made to order at 10 tonnes per thickness.
| 2.5 mm | 10 rolls, 60 sq m, about 315 kg |
|---|---|
| 4 mm | 10 rolls, 60 sq m, about 504 kg |
| 6 mm and other thicknesses | 10 tonnes per thickness |
A SoundBlanket roll is 5 x 1.2 m, which is 6 sq m. At 2100 kg per cubic metre a roll weighs about 31.5 kg at 2.5 mm and about 50.4 kg at 4 mm, so a 10 roll minimum is 60 sq m and roughly 315 kg at 2.5 mm or 504 kg at 4 mm.
06 / Worth knowing
Four honest warnings before you buy
-
The wrong product for the problem
Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Suppliers who imply a Bareilly presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Bareilly: questions we are actually asked
Is there a Bareilly factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Bareilly as the manufacturer rather than through a dealer. Bareilly works timber and furniture alongside a growing institutional sector, so workshops and lecture halls come from the same district. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Bareilly project?
High frequency, high level and continuous. Enclosure at the machine changes the exposure, and treating the hall does not. Concrete and tile put up quickly, with acoustics discovered at handover rather than designed out. Those two things move the build-up far more than the panel figure does.
Will this material last in the Bareilly climate?
Bareilly is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
What is the delivery time into Bareilly?
made at: Our own plant, Palwal, Haryana, reaches site in: one to two days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are soundBlanket mass loaded vinyl the wrong purchase?
Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
How is the order packed and what is the minimum?
10 rolls for 2.5 mm and 4 mm. Other thicknesses are made to order at 10 tonnes per thickness. 2.5 mm, 10 rolls, 60 sq m, about 315 kg. 4 mm, 10 rolls, 60 sq m, about 504 kg. 6 mm and other thicknesses, 10 tonnes per thickness. A SoundBlanket roll is 5 x 1.2 m, which is 6 sq m. At 2100 kg per cubic metre a roll weighs about 31.5 kg at 2.5 mm and about 50.4 kg at 4 mm, so a 10 roll minimum is 60 sq m and roughly 315 kg at 2.5 mm or 504 kg at 4 mm. Rolls on core tubes, wrapped and end capped, 5 x 1.2 m. Weights on the packing list, because a full roll is heavy and site access matters.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.