Manufactured in India, supplied in Bareilly
Acoustic carpet and rugs in Bareilly
We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Bareilly. Bareilly works timber and furniture alongside a growing institutional sector, so workshops and lecture halls come from the same district.
- Tile size
- 500 x 500 mm
- Thickness
- 4 mm
- Face
- High density polyester
- Backing
- Felt
- Pack coverage
- 64 sq ft per pack
- Lead time
- 4 to 7 working days
- Minimum order
- From 320 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / The material
What this material is and where it earns its place in Bareilly
A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.
Work reaching us from Bareilly is mostly furniture and timber units, colleges, hospitals, offices, auditoriums, banquet halls.
Independent houses and builder flats in brick and RC frame, often built floor by floor for different households, so the slab between them was never detailed as a separation.
- Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
- Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
- Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
- What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Bareilly.
02 / Specification
One specification sheet, the same in every market
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- Standard tile4 mm. Offices, classrooms, studios, corridors
| Tile size | 500 x 500 mm |
|---|---|
| Thickness | 4 mm |
| Face | High density polyester |
| Backing | Felt |
| Pack coverage | 64 sq ft per pack |
| Boxed | 20 kg, 55 x 55 x 15 cm |
Where a consultant is already engaged on a Bareilly project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / In this market
The Bareilly conditions that change the answer
- Saws and sanders
High frequency, high level and continuous. Enclosure at the machine changes the exposure, and treating the hall does not.
- New institutional buildings
Concrete and tile put up quickly, with acoustics discovered at handover rather than designed out.
- Dust and workshop conditions
PET felt does not shed fibre or hold dust the way soft mineral products do, which matters in a woodworking environment.
- One to two days by road
A dedicated truck from Palwal, with samples ahead of the order.
- Assembly and performance rooms
Banquet halls, marriage lawns and auditoria are large hard volumes where amplified speech and music run late into the night.
- The housing stock
Independent houses and builder flats in brick and RC frame, often built floor by floor for different households, so the slab between them was never detailed as a separation.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate
The Bareilly climate decides the material list
Bareilly is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Route to site
How material reaches a Bareilly site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | one to two days |
| Dispatch | 2 to 4 working days |
| To site | one to two days |
| Packing | Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly three hundred and fifty kilometres, normally one to two days on a dedicated truck.
320 sq ft for carpet tiles, 500 sq ft for rugs.
| Carpet tiles | 320 sq ft, about 30 sq m, 5 packs |
|---|---|
| Rugs | 500 sq ft, about 46 sq m |
A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.
06 / Read this first
Where this goes wrong, said plainly
-
The wrong product for the problem
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Bareilly certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Bareilly: questions we are actually asked
Do you manufacture acoustic carpet and rugs in Bareilly?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Bareilly as the manufacturer rather than through a dealer. Bareilly works timber and furniture alongside a growing institutional sector, so workshops and lecture halls come from the same district. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Bareilly job?
High frequency, high level and continuous. Enclosure at the machine changes the exposure, and treating the hall does not. Concrete and tile put up quickly, with acoustics discovered at handover rather than designed out. Those two things move the build-up far more than the panel figure does.
Is this the right material for Bareilly conditions?
Bareilly is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
How does an order actually travel to Bareilly?
made at: Our own plant, Palwal, Haryana, reaches site in: one to two days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do acoustic carpet and rugs fail to help?
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
How is the order packed and what is the minimum?
320 sq ft for carpet tiles, 500 sq ft for rugs. Carpet tiles, 320 sq ft, about 30 sq m, 5 packs. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Next step
Tell us the room, we will tell you the build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.