Home > Bangladesh > Acoustic foam and BassBloc
Manufactured in India, supplied in Bangladesh
Acoustic foam and BassBloc in Bangladesh
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Bangladesh. Made at our own plant in India and moved either by sea into Chattogram or overland through the land border, which is unusually direct for an export market.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / Start here
The material, and what it actually does on a Bangladesh job
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Bangladesh is mostly garment and manufacturing units, generator and plant rooms, offices, hospitals, schools, hotels.
Reinforced concrete frames with brick infill and hard floors. Apartment blocks sit close together with shared walls and open light wells between them.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Bangladesh.
02 / The numbers
Published specification, identical wherever we ship it
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
On a Bangladesh job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / Local conditions
The Bangladesh conditions that change the answer
- Reachable by road
The land border makes this one of our shortest export routes. You can order what the job needs rather than over-ordering against a long sea transit.
- Garment units at scale
Large production floors with continuous machine noise and rooms where instructions and alarms have to be understood. Enclosure first, absorption second.
- Generators run constantly
Standby and continuous generation sits close to occupied space almost everywhere. That is mass and enclosure work, not panels.
- Dense, humid, monsoon climate
PET felt does not hold moisture or feed mould, which decides whether a ceiling survives more than a couple of seasons.
- The housing stock
Reinforced concrete frames with brick infill and hard floors. Apartment blocks sit close together with shared walls and open light wells between them.
- The studio and content scene
Studios go into apartment rooms and commercial floors with neighbours on every side and generators running during outages.
For a Bangladesh practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate and durability
What the Bangladesh climate rules in and rules out
Bangladesh is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Logistics
How material reaches a Bangladesh site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Chattogram by sea, or overland through the land border |
| Dispatch | 4 to 7 working days |
| Freight | Sea or land border |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Chattogram, or overland through the land border where that suits the programme better. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Read this first
Where this goes wrong, said plainly
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Local approvals that nobody actually holds
We hold no Bangladesh certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
In finished rooms
Bangladesh: questions we are actually asked
Where are the acoustic foam and BassBloc you supply to Bangladesh actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Bangladesh as the manufacturer rather than through a dealer. Made at our own plant in India and moved either by sea into Chattogram or overland through the land border, which is unusually direct for an export market. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Bangladesh project?
The land border makes this one of our shortest export routes. You can order what the job needs rather than over-ordering against a long sea transit. Large production floors with continuous machine noise and rooms where instructions and alarms have to be understood. Enclosure first, absorption second. Those two things move the build-up far more than the panel figure does.
Is this the right material for Bangladesh conditions?
Bangladesh is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
What is the delivery time into Bangladesh?
ships from: Palwal, Haryana, India, arrives at: Chattogram by sea, or overland through the land border, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will acoustic foam and BassBloc not do?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
How is the order packed and what is the minimum?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Tell us the room, we will tell you the build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.