Manufactured in India, supplied in Bahrain
Wooden slat acoustic panels in Bahrain
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Bahrain. Made at our own plant in India and shipped into Khalifa Bin Salman Port.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / The product
What this material is and where it earns its place in Bahrain
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Bahrain is mostly offices in Manama, hotels, villas, apartments, clinics, schools, studios.
Low rise concrete and block housing with hard floors, and newer towers with shared slabs and no impact isolation.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Bahrain.
02 / Specification sheet
The numbers, and they do not move by city
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
On a Bahrain job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / On the ground
What we see driving Bahrain briefs
- Hospitality and villas
Hotels, lounges and family villas want the room to feel calm without looking treated. Material choice does more of that work than quantity.
- Humid, salt-laden air
Our PET felt does not absorb moisture, shed fibre or feed mould, which matters on an island where humidity sits high for much of the year and mineral products sag.
- Small orders, no importer layer
A single floor or one villa does not justify a trader margin. We quote small consignments direct and consolidate where it helps the cost.
- Banking and office fit-outs
Manama floors are glass and hard surfaces, with confidentiality expected in meeting rooms. Absorption plus a proper partition detail is what delivers that.
- Assembly and performance rooms
Mosques, hotel function rooms and conference halls are hard tall volumes with long decay times.
If you are specifying for a Bahrain project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate
What the Bahrain climate rules in and rules out
Bahrain is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the sensible material list before acoustics is even discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The risk we design against here is dust ingress and thermal movement in long runs.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Logistics
Getting it to Bahrain, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Khalifa Bin Salman Port, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Khalifa Bin Salman |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
Sea freight into Khalifa Bin Salman Port, then a short road run to site. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Read this first
Four honest warnings before you buy
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Bahrain
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Bahrain: questions we are actually asked
Is there a Bahrain factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Bahrain as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Khalifa Bin Salman Port. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Bahrain job?
Our PET felt does not absorb moisture, shed fibre or feed mould, which matters on an island where humidity sits high for much of the year and mineral products sag. A single floor or one villa does not justify a trader margin. We quote small consignments direct and consolidate where it helps the cost. Those two things move the build-up far more than the panel figure does.
Does Bahrain weather shorten the life of this material?
Bahrain is hot and dry for most of the year, with dust and high daytime surface temperatures. Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves. The failure we design against here is dust ingress and thermal movement in long runs.
What is the delivery time into Bahrain?
ships from: Palwal, Haryana, India, arrives at: Khalifa Bin Salman Port, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
Where do wooden slat acoustic panels fail to help?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
What quantity do we have to order, and in what packaging?
The same 500 sq ft minimum applies on export. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Tell us the room, we will tell you the build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.