Manufactured in India, supplied in Bahrain
Acoustic panels in Bahrain
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Bahrain. Made at our own plant in India and shipped into Khalifa Bin Salman Port.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The material
What you are buying, and what it fixes in Bahrain
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Bahrain is mostly offices in Manama, hotels, villas, apartments, clinics, schools, studios.
Low rise concrete and block housing with hard floors, and newer towers with shared slabs and no impact isolation.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Bahrain.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification
The published figures, unchanged by location
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
On a Bahrain job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / Local conditions
What decides the build-up in Bahrain
- Humid, salt-laden air
Our PET felt does not absorb moisture, shed fibre or feed mould, which matters on an island where humidity sits high for much of the year and mineral products sag.
- Banking and office fit-outs
Manama floors are glass and hard surfaces, with confidentiality expected in meeting rooms. Absorption plus a proper partition detail is what delivers that.
- Hospitality and villas
Hotels, lounges and family villas want the room to feel calm without looking treated. Material choice does more of that work than quantity.
- Small orders, no importer layer
A single floor or one villa does not justify a trader margin. We quote small consignments direct and consolidate where it helps the cost.
- School and campus buildings
School buildings are hard surfaced with large halls, and new campuses are glazed and reverberant.
- The studio and content scene
A small production sector working inside commercial shells where plant and neighbour noise decide the floor.
Architects working in Bahrain usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Conditions
What the Bahrain climate rules in and rules out
Bahrain is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the sensible material list before acoustics is even discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The risk we design against here is dust ingress and thermal movement in long runs.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Logistics
Getting it to Bahrain, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Khalifa Bin Salman Port, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Khalifa Bin Salman |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
Sea freight into Khalifa Bin Salman Port, then a short road run to site. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Worth knowing
Four honest warnings before you buy
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a Bahrain presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
07 / In projects
The material in real interiors
Bahrain: questions we are actually asked
Are these acoustic panels made in Bahrain?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Bahrain as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Khalifa Bin Salman Port. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Bahrain project?
Our PET felt does not absorb moisture, shed fibre or feed mould, which matters on an island where humidity sits high for much of the year and mineral products sag. A single floor or one villa does not justify a trader margin. We quote small consignments direct and consolidate where it helps the cost. Those two things move the build-up far more than the panel figure does.
Does Bahrain weather shorten the life of this material?
Bahrain is hot and dry for most of the year, with dust and high daytime surface temperatures. Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves. The failure we design against here is dust ingress and thermal movement in long runs.
How does an order actually travel to Bahrain?
ships from: Palwal, Haryana, India, arrives at: Khalifa Bin Salman Port, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
When are acoustic panels the wrong purchase?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
What quantity do we have to order, and in what packaging?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Send a plan and a section, get a real build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.