Manufactured in India, supplied in Austria
SoundBlanket mass loaded vinyl in Austria
We manufacture soundBlanket mass loaded vinyl at our own plant at Palwal in Haryana, India, and supply them into Austria. Made at our own plant in India and routed through Koper or Hamburg, then rail and road inland.
- Density
- 2100 kg per cubic metre
- 2.5 mm
- STC 30, 5.25 kg per sq m
- 4 mm
- STC 34, 8.4 kg per sq m
- 6 mm
- 12.6 kg per sq m, STC on request
- Roll size
- 5 x 1.2 m, 6 sq m per roll
- Lead time
- 4 to 7 working days
- Minimum order
- From 10 rolls
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / What it is
The product, described honestly, for a Austria brief
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. It is the barrier product, not an absorber, and it is the right answer when the problem is noise passing through a structure.
Work reaching us from Austria is mostly apartments, alpine hotels, offices, schools, clinics, studios, timber buildings.
Gruenderzeit blocks have solid masonry walls and timber joist floors, so footfall carries even where airborne noise does not. Newer stock is concrete and much harder inside.
- Wall, decoupled Independent stud, membrane between the boards, cavity absorption, two boards. The membrane is one part of a system, never the whole answer.
- Floor, floating Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
- Duct and plant wrap Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
- What it will not do Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for SoundBlanket MLV are on the main product page. This page covers what that means for a project in Austria.
02 / Specification
The numbers, and they do not move by city
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- 2.5 mmSTC 30, 5.25 kg per sq m. Ducts, light partitions, retrofit where depth is tight
- 4 mmSTC 34, 8.4 kg per sq m. Party walls, floors, plant rooms, the common specification
- 6 mm12.6 kg per sq m. Machine enclosures and low frequency problems
| Density | 2100 kg per cubic metre |
|---|---|
| 2.5 mm | STC 30, 5.25 kg per sq m |
| 4 mm | STC 34, 8.4 kg per sq m |
| 6 mm | 12.6 kg per sq m, STC on request |
| Roll size | 5 x 1.2 m, 6 sq m per roll |
| Form | Limp sheet, cuts with a knife, seams lapped and sealed |
On a Austria job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What we see driving Austria briefs
- Landlocked, so plan the inland leg
Koper is the shorter route from India, Hamburg the more frequent one. Either way there is rail and road after the port, and we build that into the date rather than quoting you a port arrival.
- Timber construction is growing
Cross laminated and timber frame buildings are light. Light means low frequency passes easily, so the answer is added mass and a resilient break, not more absorption.
- Resort work runs to an opening date
Alpine hotel refurbishment happens in a short window between seasons. Real dispatch and transit dates matter more than a slightly better price.
- Numbers before materials
Send the target values and the build-up. We will tell you what our material reaches and where it will not get you there, in writing, before you commit.
- The housing stock
Gruenderzeit blocks have solid masonry walls and timber joist floors, so footfall carries even where airborne noise does not. Newer stock is concrete and much harder inside.
- The studio and content scene
A strong classical and recording tradition means measured targets are expected rather than adjectives.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate and durability
Why the climate in Austria changes the material, not the target
Austria is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Logistics
What the route into Austria actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Koper or Hamburg, then rail and road inland |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Koper or Hamburg |
| Packing | Rolls on core tubes, wrapped and end capped, 5 x 1.2 m. Weights on the packing list, because a full roll is heavy and site access matters. |
| Lead time | 4 to 7 working days. Full container quantities scheduled against the vessel. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Koper or Hamburg, then rail and road inland. Air freight for samples and urgent quantities.
The same minimums apply on export as on domestic orders.
| 2.5 mm and 4 mm | 10 rolls, 60 sq m |
|---|---|
| 6 mm and other thicknesses | 10 tonnes per thickness |
A SoundBlanket roll is 5 x 1.2 m, which is 6 sq m. At 2100 kg per cubic metre a roll weighs about 31.5 kg at 2.5 mm and about 50.4 kg at 4 mm, so a 10 roll minimum is 60 sq m and roughly 315 kg at 2.5 mm or 504 kg at 4 mm.
06 / Before you buy
The things worth knowing before you place the order
-
The wrong product for the problem
Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Austria certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Austria: questions we are actually asked
Are these soundBlanket mass loaded vinyl made in Austria?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Austria as the manufacturer rather than through a dealer. Made at our own plant in India and routed through Koper or Hamburg, then rail and road inland. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Austria project?
Koper is the shorter route from India, Hamburg the more frequent one. Either way there is rail and road after the port, and we build that into the date rather than quoting you a port arrival. Cross laminated and timber frame buildings are light. Light means low frequency passes easily, so the answer is added mass and a resilient break, not more absorption. Those two things move the build-up far more than the panel figure does.
Will this material last in the Austria climate?
Austria is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How does an order actually travel to Austria?
ships from: Palwal, Haryana, India, arrives at: Koper or Hamburg, then rail and road inland, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do soundBlanket mass loaded vinyl fail to help?
Mass fixed hard to an existing wall gives far less than the same mass on an independent leaf. If we are told the wall cannot be thickened, we will say what the membrane will and will not achieve rather than quote the laboratory figure and let the site find out.
What is the minimum order and how is it packed?
The same minimums apply on export as on domestic orders. 2.5 mm and 4 mm, 10 rolls, 60 sq m. 6 mm and other thicknesses, 10 tonnes per thickness. A SoundBlanket roll is 5 x 1.2 m, which is 6 sq m. At 2100 kg per cubic metre a roll weighs about 31.5 kg at 2.5 mm and about 50.4 kg at 4 mm, so a 10 roll minimum is 60 sq m and roughly 315 kg at 2.5 mm or 504 kg at 4 mm. Rolls on core tubes, wrapped and end capped, 5 x 1.2 m. Weights on the packing list, because a full roll is heavy and site access matters.
Next step
Drawings in, BOQ and a delivered date out
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.