Manufactured in India, supplied in Auckland
Acoustic panels in Auckland
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Auckland. Made at our own plant in India and shipped straight into Auckland, so the container arrives at the city rather than a long domestic leg away.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The material, and what it actually does on a Auckland job
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Auckland is mostly apartments and townhouses, offices, hospitality, schools, clinics, studios.
Timber frame with plasterboard linings, so walls have very little mass. Apartment and townhouse party walls need a second leaf rather than surface treatment.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Auckland.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / The numbers
Published specification, identical wherever we ship it
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / On the ground
What decides the build-up in Auckland
- Apartments built light and fast
Townhouse and apartment stock built quickly in timber frame. The separating construction is where noise complaints concentrate.
- Weathertightness shapes the build-up
Wall assemblies here are designed around drainage and drying. An acoustic layer has to work with that, not trap moisture in it.
- Volcanic ground, seismic detailing
Flexible junctions are required, so a rigid acoustic bridge across a movement joint is not acceptable.
- The port is in the city
Direct sea into Auckland keeps the road leg short, though the sea leg itself is long and we quote it fully.
- School and campus buildings
Classroom acoustics are taken seriously and open plan learning spaces are common, which makes speech intelligibility the design target.
- The studio and content scene
Project studios go into garages and sleepouts in timber framed housing that leaks at every junction.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Conditions
Why the climate in Auckland changes the material, not the target
Auckland is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Getting it there
Supply into Auckland, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Auckland, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Auckland |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight direct into Auckland, then a short road run to site. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Before you buy
Four honest warnings before you buy
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Auckland certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
The product on finished jobs
Auckland: questions we are actually asked
Is there a Auckland factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Auckland as the manufacturer rather than through a dealer. Made at our own plant in India and shipped straight into Auckland, so the container arrives at the city rather than a long domestic leg away. You buy at factory prices with one consistent batch across the order.
Why would a Auckland build-up differ from anywhere else?
Townhouse and apartment stock built quickly in timber frame. The separating construction is where noise complaints concentrate. Wall assemblies here are designed around drainage and drying. An acoustic layer has to work with that, not trap moisture in it. Those two things move the build-up far more than the panel figure does.
Will this material last in the Auckland climate?
Auckland is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How does an order actually travel to Auckland?
ships from: Palwal, Haryana, India, arrives at: Auckland, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What will acoustic panels not do?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
Is there a minimum order, and how does it arrive?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Send a plan and a section, get a real build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.