Manufactured in India, supplied in Albania
Acoustic foam and BassBloc in Albania
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Albania. Made at our own plant in India and shipped into Durrës, then a short road run to almost anywhere in the country.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / The material
What you are buying, and what it fixes in Albania
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Albania is mostly coastal hotels and resorts, apartment blocks, restaurants, offices, schools, clinics.
Concrete frame with block infill and hard floors, in blocks that sit close together with narrow gaps between them.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Albania.
02 / Specification
One specification sheet, the same in every market
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
Where a consultant is already engaged on a Albania project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / In this market
The Albania conditions that change the answer
- Season openings do not move
Coastal work has to finish before the season starts. Real dispatch and transit dates matter more here than a marginally better price.
- Concrete blocks, hard interiors
The structure carries mass, so the recurring problem is rooms that are simply too live and impact passing down through slabs.
- A small country, a short road leg
Durrës is close to most sites, which keeps the inland cost low and the landed price predictable.
- Coastal humidity and salt
PET felt does not absorb moisture, shed fibre or feed mould, which matters where mineral products sag within a couple of seasons.
- The housing stock
Concrete frame with block infill and hard floors, in blocks that sit close together with narrow gaps between them.
- The studio and content scene
A small but growing content sector working inside existing commercial and residential buildings.
For a Albania practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Conditions
What the Albania climate rules in and rules out
Albania is mild summers and cold, wet winters, and that narrows the sensible material list before acoustics is even discussed.
Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air.
The risk we design against here is condensation and cold bridging behind new linings.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Logistics
How material reaches a Albania site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Durrës, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Durrës |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Durrës, then a short road run to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Read this first
Four honest warnings before you buy
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Albania
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
The product on finished jobs
Albania: questions we are actually asked
Is there a Albania factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Albania as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Durrës, then a short road run to almost anywhere in the country. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Albania enquiry?
Coastal work has to finish before the season starts. Real dispatch and transit dates matter more here than a marginally better price. The structure carries mass, so the recurring problem is rooms that are simply too live and impact passing down through slabs. Those two things move the build-up far more than the panel figure does.
Does Albania weather shorten the life of this material?
Albania is mild summers and cold, wet winters. Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air. The failure we design against here is condensation and cold bridging behind new linings.
When would material land on a Albania site?
ships from: Palwal, Haryana, India, arrives at: Durrës, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will acoustic foam and BassBloc not do?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
Is there a minimum order, and how does it arrive?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Drawings in, BOQ and a delivered date out
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.