For projects in Ahmedabad
Recording studio acoustics and soundproofing in Ahmedabad
Two jobs that must not be confused: keeping the building out, and making the room honest inside. The first is mass and decoupling and has to be built first. The second is absorption and diffusion and can be tuned later. Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
- Isolation
- A measured background level, agreed before anything is bought.
- Low frequency
- Corner and boundary absorption with real depth, not surface foam.
- Early reflections
- Controlled at the mix position, and only there.
- Quote
- From a plan and a section, within 48 hours
01 / Start here
The material, and what it actually does on a Ahmedabad job
Two jobs that must not be confused: keeping the building out, and making the room honest inside. The first is mass and decoupling and has to be built first. The second is absorption and diffusion and can be tuned later.
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
Work reaching us from Ahmedabad is mostly textile and processing units, institutional buildings, offices, auditoriums, schools, hospitals.
- Textile machinery runs all shift Continuous machine noise in units that often sit close to housing. Enclosure and barrier at the source, not lining the hall.
- Ambitious new buildings Exposed concrete and brick used as the finish, which looks superb and reflects almost everything. Absorption has to go where it will not fight the architecture.
- Dry heat PET felt does not sag, shed fibre or degrade at high temperature, which matters in roof voids and rooms that get genuinely hot.
- Isolation A measured background level, agreed before anything is bought.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for studio soundproofing are on the main product page. This page covers what that means for a project in Ahmedabad.
02 / The build-up
What goes where, from the structure in
-
Layer 1
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Ahmedabad, heavy industrial plant across the state, so compressors, presses and generator sets sit close to offices and canteens inside the same building.
Wall, decoupled. Independent stud, membrane between the boards, cavity absorption, two boards. The membrane is one part of a system, never the whole answer.
-
Layer 2
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Ahmedabad, auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
Independent leaf. A second wall that does not touch the first. Nothing else comes close for the money.
-
Layer 3
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Ahmedabad, large school and college campuses in concrete and tile, with assembly halls and auditoria in constant use.
Ceiling first. In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
If you are specifying for a Ahmedabad project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
03 / Local conditions
What the buildings in Ahmedabad do to the specification
- Textile machinery runs all shift
Continuous machine noise in units that often sit close to housing. Enclosure and barrier at the source, not lining the hall.
- Ambitious new buildings
Exposed concrete and brick used as the finish, which looks superb and reflects almost everything. Absorption has to go where it will not fight the architecture.
- Dry heat
PET felt does not sag, shed fibre or degrade at high temperature, which matters in roof voids and rooms that get genuinely hot.
- Two days from the plant
A short run by Indian standards, so freight is cheap and samples arrive quickly.
- The housing stock
RC frame apartments and bungalows with stone and tile floors, in dry dusty conditions where open products collect dust.
- The studio and content scene
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
04 / Room by room
Room by room, on a typical Ahmedabad job
-
Isolation
A measured background level, agreed before anything is bought. Continuous machine noise in units that often sit close to housing. Enclosure and barrier at the source, not lining the hall.
- Acoustic foam and BassBloc, 1800 x 900 mm
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Soundproof curtains, 5.5 kg per sq m
-
Low frequency
Corner and boundary absorption with real depth, not surface foam. Exposed concrete and brick used as the finish, which looks superb and reflects almost everything. Absorption has to go where it will not fight the architecture.
- Acoustic foam and BassBloc, 20 mm
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Soundproof curtains, Up to 30 dB
-
Early reflections
Controlled at the mix position, and only there. PET felt does not sag, shed fibre or degrade at high temperature, which matters in roof voids and rooms that get genuinely hot.
- Acoustic foam and BassBloc, 100 kg per cubic metre
- SoundBlanket mass loaded vinyl, 12.6 kg per sq m, STC on request
- Soundproof curtains, 30
For a Ahmedabad interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
04 / Conditions
What the Ahmedabad climate rules in and rules out
Ahmedabad is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the material list before acoustics is discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The failure we design against here is dust ingress and thermal movement in long runs.
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
06 / Straight talk
Six mistakes that turn into a second fit-out
-
Buying foam to solve an isolation problem
It sounds like a small detail until the room is finished and the complaint arrives.
-
Treating the room before the shell is isolated
Small on the drawing, expensive on site, and almost always found after handover.
-
Killing the room completely and calling it controlled
More absorption is not better absorption. Past the target the room goes flat and people raise their voices to compensate.
-
Treating it as a generic Ahmedabad job
Continuous machine noise in units that often sit close to housing. Enclosure and barrier at the source, not lining the hall.
05 / Route to site
What the route into Ahmedabad actually looks like
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | two days |
| Dispatch | 2 to 4 working days |
| To site | two days |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly nine hundred kilometres, normally two days on a dedicated truck.
Questions from Ahmedabad projects
What makes recording studio acoustics and soundproofing different in Ahmedabad?
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room. Continuous machine noise in units that often sit close to housing. Enclosure and barrier at the source, not lining the hall.
Where should the budget go first on a Ahmedabad project?
Isolation. A measured background level, agreed before anything is bought. Low frequency. Corner and boundary absorption with real depth, not surface foam.
Do you have an office or installation team in Ahmedabad?
No. We manufacture in India and supply into Ahmedabad. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Ahmedabad site?
made at: Our own plant, Palwal, Haryana, reaches site in: two days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Buying foam to solve an isolation problem. Treating the room before the shell is isolated.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.