Manufactured in India, supplied in Dublin
Soundproof curtains in Dublin
We manufacture soundproof curtains at our own plant at Palwal in Haryana, India, and supply them into Dublin. Made at our own plant in India and shipped straight into Dublin Port, which sits inside the city, so the road leg to most sites is measured in minutes.
- Build-up
- 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face
- Total thickness
- 10 to 12 mm
- Weight
- 5.5 kg per sq m
- Reduction
- Up to 30 dB
- STC
- 30
- Lead time
- Made to size
- Minimum order
- 5 pieces
- ASTM E90
- Standard sizes, 8 x 4 ft and 5 x 4 ft
- Made at our own plant, Palwal, Haryana, India
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / The material
What this is, and what it changes in a Dublin room
A layered curtain with a mass loaded vinyl core, used where an opening has to stay an opening. It is the answer for a doorway, a stage, a partition that must move, not a substitute for a wall.
Work reaching us from Dublin is mostly build-to-rent apartments, Georgian conversions, docklands offices, pubs and venues, clinics.
Terraced and semi-detached housing with block party walls and timber upper floors. Apartment stock is concrete with hard finishes throughout.
- Full height with return Curtain taken floor to soffit with a side return and an overlap, because the gap is what leaks, not the fabric.
- Track with a seal Ceiling track plus a floor seal or drape, so the perimeter is closed when it is drawn.
- Double layer at a doorway Two curtains with an air gap where a single layer will not reach the target.
- What it will not do A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Dublin.
02 / Specification
The numbers, and they do not move by city
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Standard5.5 kg per sq m. Openings, stages, temporary partitions
| Build-up | 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face |
|---|---|
| Total thickness | 10 to 12 mm |
| Weight | 5.5 kg per sq m |
| Reduction | Up to 30 dB |
| STC | 30 |
| Test standard | ASTM E90 |
| Standard sizes | 8 x 4 ft and 5 x 4 ft |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / Local conditions
What we see driving Dublin briefs
- The port is in the city
Containers land at Dublin Port and are on site the same day. That is the practical reason a factory in India can compete here on landed cost and on timing.
- Build-to-rent party walls
Thousands of units built to the same separating detail. When that detail underperforms, it underperforms in every flat, so it is worth getting right on the drawing.
- Georgian conversions
High ceilings, lath and plaster, timber floors and protected fabric. Everything has to be done internally and shallow, and often reversibly.
- Late trading under homes
Pubs and venues now sit beneath apartments that were not there ten years ago. The low end and the footfall are what generate the complaints.
- The housing stock
Terraced and semi-detached housing with block party walls and timber upper floors. Apartment stock is concrete with hard finishes throughout.
- The studio and content scene
Project studios go into converted rooms and garages in terraced stock, where the party wall sets the limit.
For a Dublin practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate
Durability in Dublin, before acoustics is discussed
Dublin is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Route to site
Getting it to Dublin, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Dublin Port, minutes from most city sites |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Dublin Port |
| Packing | Rolled and bagged with track and fixings listed separately. |
| Lead time | Made to size. Confirmed at quote. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight direct into Dublin Port, then a short road run to site. Air freight for samples and urgent quantities.
The same 5 piece minimum applies on export.
| Any size | 5 pieces |
|---|
Curtains are made to size, so the minimum is counted in pieces rather than area.
06 / Straight talk
Where this goes wrong, said plainly
-
The wrong product for the problem
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a Dublin presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Dublin: questions we are actually asked
Where are the soundproof curtains you supply to Dublin actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Dublin as the manufacturer rather than through a dealer. Made at our own plant in India and shipped straight into Dublin Port, which sits inside the city, so the road leg to most sites is measured in minutes. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Dublin project?
Containers land at Dublin Port and are on site the same day. That is the practical reason a factory in India can compete here on landed cost and on timing. Thousands of units built to the same separating detail. When that detail underperforms, it underperforms in every flat, so it is worth getting right on the drawing. Those two things move the build-up far more than the panel figure does.
Does Dublin weather shorten the life of this material?
Dublin is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How does an order actually travel to Dublin?
ships from: Palwal, Haryana, India, arrives at: Dublin Port, minutes from most city sites, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do soundproof curtains fail to help?
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
What is the minimum order and how is it packed?
The same 5 piece minimum applies on export. Any size, 5 pieces. Curtains are made to size, so the minimum is counted in pieces rather than area. Rolled and bagged with track and fixings listed separately.
Next step
Drawings in, BOQ and a delivered date out
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Dublin.